User's Manual

LinkTek WL11N Wireless Broadband Router User Guide
14
Using the Setup Wizard
The initial window summarizes the setup process. Click the Next button to proceed. You may
stop using the Setup Wizard at any time by clicking the
Exit
button. If you exit the wizard you will
return to the
Setup Wizard
window without saving any of the settings changed during the
process.
The first pop-up window of the Setup Wizard lists the basic steps in the process. These steps
are as follows:
1. Set the system password
2. Set the system time.
3. Configure the connection to the Internet.
4. Set the wireless configuration.
5. Save the new configuration settings and reboot the system.