User's Manual

LinkTek WL11N Wireless Broadband Router User Guide
25
Using the Setup Wizard – WEP Configuration
The Setup Wizard wireless LAN security configuration is limited to WEP; for WPA or WPA2
security, use the web-based manager Wireless Settings menu. To configure WEP in the Setup
Wizard, select Open, Shared or Both for Authentication Type, use the Cipher: pull down menu to
select the level of encryption or cipher rate, 64 bits or 128 bits and type in an encryption key of
appropriate length. For 64-bit encryption, type a key ten hexadecimal digit (0~9,A~F) key, for
128-bit encryption type a 26 hexadecimal digit key.
Using the Setup Wizard – WPA2 Auto Configuration
If you are configuring WPA security, select
Security
type WPA2 Auto, enter the
Passphrase
used for authentication. Click Next to continue to the final menu.