User's Manual

LinkTek WL11N Wireless Broadband Router User Guide

Configure the Dynamic IP address connection and click the

Apply

button to put the new settings

into effect. See the table below for a description of the parameters configured for the connection.

Dynamic IP Parameters Description

Host Name

Enter the Host Name provided if necessary (optional).

MAC Address/Clone MAC

Address

This field will instruct the user to enter the Media Access Control (MAC)

address of the Ethernet Card of your computer, if instructed to do so by

your ISP. To quickly accomplish this, click the Clone MAC Address button,

which will automatically copy the MAC address of your Ethernet card and

enter it into the space provided, which will replace the MAC address of the

router.

DNS (Primary/ Secondary)

These are the IP addresses of your primary and backup domain name

server, which should also be provided to you by your ISP. The router will

first try the Primary DNS Address to resolve a website’s URL IP address.

If this IP address fails, the router will then try the Secondary DNS

Address.

MTU

The Maximum Transmission Unit size may be changed if you want to

optimize efficiency for uploading data through the WAN interface. The

default setting (1492 bytes) should be suitable for most users. Some user

may want to adjust the setting to optimize performance for wireless traffic

or when low latency is desired (such as with Internet gaming). It is highly

recommended that the user research how adjusting the MTU may affect

network traffic throughput.