User's Manual

LinkTek WL11N Wireless Broadband Router User Guide
39
PPPoE Connection
PPP or Point-to-Point protocol is a standard method of establishing a network
connection/session between networked devices. PPPoE (PPP over Ethernet), as described in
RFC 2516, is a method of using PPP through the Ethernet network.
There are two ways to configure the PPoE connection on the router, one is for a
Dynamic
PPPoE
configuration, which means the router will implement some settings automatically
through DHCP, such as the router’s IP address and the default gateway. The other is through a
Static PPPoE connection, in which the user must configure the IP address and the DNS
addresses automatically.
WAN Settings menu – PPPoE connection