User's Manual

LinkTek WL11N Wireless Broadband Router User Guide
41
Bridge Connection
A Bridge connection does not require much configuration for the router, however most of the
router functions are not available in bridge mode.
WAN Settings menu – Bridge connection
To configure the WL11N as a bridge for the WAN connection, select the
Bridge
WAN settings
option and click Apply. Do this immediately change the IP settings status of the device to DHCP
client. Be sure to have a DHCP server running and connected to the network if this option is to
be used. Remember that as a bridge, third party connection software is normally required on
each computer attempting to get Internet access.