User's Manual

LinkTek WL11N Wireless Broadband Router User Guide
v
Installation Notes
In order to establish a connection to the Internet it will be necessary to provide information to the
router that will be stored in its memory. For some users, only their account information (User
Name and Password) is required. For others, various parameters that control and define the
Internet connection will be required.
Internet Connection
The WL11N is intended for use with a broadband device such as an ADSL, xDSL or cable
(CATV) modem. The physical connection to the Internet must first be established through a
broadband device, typically this should be set up as an invisible bridge.
Operating Systems
The WL11N uses an HTML-based web interface for setup and management. The web
configuration manager may be accessed using any operating system capable of running web
browser software, including Microsoft Windows® operating systems.
Web Browser
Any common web browser can be used to configure the router using the web configuration
management software. The program is designed to work best with more recently released
browsers. The web browser must have JavaScript enabled. JavaScript is enabled by default on
many browsers. Make sure JavaScript has not been disabled by other software (such as virus
protection, firewall software or Internet security packages) that may be running on your computer.
Ethernet or Wireless Adapter
Any computer that uses the router must be able to connect to it through an Ethernet port or
through the wireless 802.11n/g/b connection. The computer therefore must have either an
Ethernet adapter or 802.11n/g/b adapter installed. Network adapters are standard for most
computers sold presently.