User's Manual

24
Descriptions about each LED, switch and connector are in the following table.
No.
Signal
Function
(1)
ACT LED
Indicates the operational/error status of the unit.
Lights red
Error detection during operation
Lights green
In operation
(2)
5G LED
Displays the status of wireless IF 5 GHz
Lights green
In normal operation
Off
In the process of start-up
(3)
2.4G LED
Displays the status of wireless IF 2.4 GHz
Lights green
In normal operation
Off
In the process of start-up
(4)
ETH LED
Indicates the link status of the Ethernet port.
Blinks green
In the process of frame transmission/reception
Lights green
Link established
Off
Link disconnected
(5)
INIT switch
(Push switch)
Initializes configuration data and log data.
(6)
Ethernet IF
ETH
(RJ-45 modular jack)
Connect an Ethernet cable.
The ETH port supports power supply from a PoE power feeding equipment.
(7)
DC IN jack
Connect the DC plug of the provided AC adapter.