User's Manual

28
 Rear/Left side
No.
Signal
Function
(1)
INIT switch
(Push switch)
Initializes configuration data and log data.
(2)
CONSOLE
(RJ-45 connector)
Connect the console for maintenance, such as a PC.
(3)
MODE 1, 2
(Slide switch)
Not be used. Do not change the default.
(4)
DC IN jack
Connect the DC plug of the provided AC adapter.
(5)
ETH2
(RJ-45 connector)
Connect an Ethernet cable.
(6)
ETH1( PoE) connector
(RJ-45 connector)
Connect an Ethernet cable and start power feeding from a PoE power feeding
equipment.
(7)
Holder
Use this with a cable tie to prevent disconnection of the AC adapter.
(8)
Claw (x4)
Attach by tightening the provided M6 screw when installing on a wall.
(1) INIT switch
(2) CONSOLE
(3) MODE switch
(4) DC IN jack
(5) ETH2
(6) ETH1 (PoE)
(7) Holder
(8) Claw (x4)