PT-3152/ PT-3152C/ PT3153/ PT-3153C Network Camera Quick Installation Guide
PT-3152(C)/PT-3153(C) Quick Installation Guide FCC Warning Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
PT-3152(C)/PT-3153(C) Quick Installation Guide EQUIPMENT SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. CAUTION: 1. To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. 2. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
PT-3152(C)/PT-3153(C) Quick Installation Guide 1 Before You Begin… System Requirements ● 10 Base-T Ethernet or 100 Base-TX Fast Ethernet ● CD-ROM or DVD-ROM drive ● CPU: Intel Pentium IV 2.
PT-3152(C)/PT-3153(C) Quick Installation Guide 2 Hardware Installation Attach the Metal Plate 1. Remove the two rubber pads under the base of the Camera. 2. Slide the metal plate onto the base of the Camera, making sure that the two holes on the base of the Camera align with the two screw holes on the base of the Camera. 3. Secure the metal plate to the base of the Camera with the two screws provided. 4.
PT-3152(C)/PT-3153(C) Quick Installation Guide 3 Running the IPCam Wizard Launch IPCam Wizard Use the IPCam Wizard to quickly configure IP settings for the camera that are compatible with your computer. The IPCam Wizard is a program run separately from the web browser video display and manager. First install the program from the Installation CD, then use the IPCam Wizard to configure suitable IP settings for the camera. Follow the steps below to install the IPCam Wizard program. 1.
PT-3152(C)/PT-3153(C) Quick Installation Guide 4. This screen allows you to change the administrator password. To change the password carry out the following: Tick the Change Password checkbox Type a New Password Type it again to Confirm Password. Click the > symbol to proceed to the next IPCam Wizard menu screen. Leave the checkbox unchecked to skip this step. 5.
PT-3152(C)/PT-3153(C) Quick Installation Guide If you are choosing a Fixed IP network connection, proceed to Step 6b to configure Fixed IP network settings. If choosing DHCP, skip ahead to step 7. a. Type in the User Name for your PPPoE connection in the User Name field, the password in the Password field and confirm the password in the Confirm Password field. Click the > symbol to proceed to the next IPCam Wizard menu screen. b. A Fixed IP connection requires the IP settings to be manually entered.
PT-3152(C)/PT-3153(C) Quick Installation Guide a. Wireless setup requires entry of wireless settings including authentication method, encryption and key. 8. The following window appears, summarizing the network settings of your Camera: When you have finished setting up the Camera, click the > symbol to apply the new settings. 9. The following screen appears to indicate that the settings are being applied to the camera. 10.
PT-3152(C)/PT-3153(C) Quick Installation Guide 11. The camera is now ready to use. To launch your default browser and connect to the camera’s web manager and live video display, click the address of the camera in the center of the menu. 12. Type the administrator’s User Name (ID) and Password to access the camera’s user interface. Default settings is admin / admin. 13. The first menu to appear shows the live video display and the camera control (see followings for a description of the controls).
PT-3152(C)/PT-3153(C) Quick Installation Guide 4 Using the IP camera Video Display Control Change display settings Click on the little screen icon to quickly switch among the preconfigured formats of the video, which correspond to the video settings profile. Four profiles can be configured using the Video and Audio Settings menu. See the description of the menu below in the section of the same title. The yellow icon shows the profile which is currently being used.
