ScreenPlay WiFi Adapter ® SPADPT08 Quick Setup Guide Configuration rapide Schnelles Setup Configurazione rapida Configuración rápida Configuração rápida Snelle installatie Snabbinstallation Hurtig opsætning Hurtigoppsett Pika-asetus Gyorsbeállítás Rychlé nastavení Szybka konfiguracja Быстрая настройка
Introduction The iomega SP USB ADAPTOR is a convenient wireless connectivity solution for desktop or notebook PCs. Instead of stringing Ethernet cables to your PC or dismantling your desktop computer case, the SPADPT08 can enable 802.11n wireless connectivity by simply utilizing your desktop or notebook PCʼs USB port. Powered by RangeBooster N™ technology, the SPADPT08 provides a faster wireless connection and superior reception than 802.11g*.
Here is a list of features that can be found on the iomega SP USB ADAPTOR : Wireless 802.11n complaint and backwards compatible with 802.11b/g standards. Convenient Plug & Play installation. Compact size for easy placement around the computer. Supports Wireless encryptions like Wired Equivalent Privacy (WEP) and Wi-Fi Protected Access (WPA/WPA2). Support Wireless authentication methods like 802.1X. Support Wireless Infrastructure and Ad-Hoc topologies.
Wireless Installation Considerations The iomega SP USB ADAPTOR lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind, however, that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business.
Basic Installation This section will walk you through the installation process. If you have a built-in wireless adapter, please disable it in device manager before installing your iomega adapter. Also, if you have previously installed another wireless adapter, please make sure any software is uninstalled. Installing the SPADPT08 Adapter Before installing the wireless adapter, please note that you have to install the software rst BEFORE plugging the wireless adapter into the USB port of the computer.
There are two ways to connect to the wireless network using this adapter: (1) By using the Operating Systemʼs built-in wireless utility. (2) By using the Wi-Fi Protected Setup (WPS) button connection method. Click on the ʻFinishʼ button to complete this setup.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
