User Manual For WMP-A01 Wireless Mini PCI adapter Version: 1.
This document contains confidential proprietary information and is the property of Alpha Networks Corporation. The contents of this document may not be disclosed to unauthorized persons without the written consent of Alpha Networks Corporation.
Contents TEST OPERATION MANUAL............................................................................................................4 Test Utility Installation:....................................................................................................................4 Configuration: ..................................................................................................................................5 1.0 SCOPE........................................................................
Test Operation Manual Test Utility Installation: 1. Unzip “ART_V0_5_b25ALL.zip” to “C:\”. 2. The utility must run on Win2000 or WinXP. Hardware Installation: Before insert the card, please execute the below instruction at first !! 1. Win2000 OS : Enter in the directory : C:\ v0_5_b25ALL\art_driver\bin\2000 Execute the uninst_new_drv_2k.bat: Execute the inst_new_drv_2k.bat : WinXP OS : Enter in the directory : C:\ v0_5_b25ALL\art_driver\bin\xp Execute the uninst_new_drv_xp.bat: Execute the inst_new_drv_xp.
Configuration: 1. Enter the DOS command mode , then change the directory to : C:\ v0_5_b25ALL\art_driver\bin\xp 2. Input the instruction: art \id=2082 Then press enter . ART TEST MODE: 1. Once utility is executed, a menu with test options will appear. To run a test, press the character key that is assigned to the test option. For example, press “c” to run the continuous transmit test, or press “r ” to run the continuous receive test.
3. Continuous Receive Options Continuous receive options will put the radio into receive mode to allow for radio measurements. Press ESC to return to the main Test Options menu when finished. 1.0 Scope 1.1 Document This document is to specify the product requirements for 802.111a/n Wireless Mini PCI adapter. This mPCI is based on Atheros chipset that complied with complied with IEEE 802.11n , and it is also backward complied with IEEE 802.11a standard from 5.15~5.825GHz wideband .
2.0 Requirements The following sections identify the detailed requirements of the 802.111a/n Wireless Mini PCI adapter. 2.1 General Requirements 2.1.1 General Section # Feature 2.1.1.1 2.1.1.2 Antenna Type y Operating y Voltage Form Factor y and Interface 2.1.13 Detailed Description I-pex compatible connectors 3.3VDC +/- 10% Mini-PCI type III A form factor 2.2 Requirements of Reliability, Maintainability and Quality # Feature Detailed Description 2.2.1 2.22 2.2.
# Feature 2.3.3 Operating Humidity conditions 2.34 Non-Operating Humidity Conditions Detailed Description The product is capable of continuous reliable operation when subjected y to relative humidity in the range of 10% and 90% non-condensing.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Industry Canada Statement This device complies with RSS‐210 of the Industry Canada Rules.
interference to co‐channel mobile satellite systems. Because high power radars are allocated as primary users (meaning they have priority) in 5250‐5350 MHz and 5650‐5850 MHz, these radars could cause interference and/or damage to license exempt LAN devices. IMPORTANT NOTE: IC Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment.
integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.
NOTE IMPORTANTE: (Pour l'utilisation de dispositifs mobiles) Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.
Conform é ment à la r é glementation d'Industrie Canada, le pr é sent é metteur radio peutfonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pourl'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectriqueà l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que lapuissance isotrope rayonnée équivalente (p.i.r.e.
