For fid (Atheros AR9223) en Wireless Mini PCI Adapter tia l User Manual on Model Number : WMP-N09 C om pa ny C Revision: 1.3 This document contains confidential proprietary information and is the property of Alpha Networks Inc.. The contents of this document may not be disclosed to unauthorized persons without the written consent of Alpha Networks Inc..
Rev. Date Author Reason for Changes 1.0 1.1 March of 26th, 2008 August of 6th, 2008 Joyce Lin Amanda Wang 1.
Contents OPERATION MANUAL ..............................................................................................................................................5 TEST UTILITY INSTALLATION:..............................................................................................................................5 1.0 SCOPE....................................................................................................................................................................8 tia l 1.
C om pa ny C on fid en tia l
Operation Manual Test Utility Installation: 1. Unzip “ ART_v0_7_b27_ar928xALL 2. The utility must run on WinXP or Vista 1. WinXP OS: en Enter in the directory: C:\ v0_7_b27_ar928xALL \art_driver\bin\xp Execute the uninst_old_drv.bat: Execute the inst_new_drv_xp.bat tia Before insert the card, please execute the below instruction at first!! l Hardware Installation: Vista OS: fid Enter in the directory: C:\ v0_7_b27_ar928xALL \art_driver\bin\Vista Execute the uninst_old_drv.
l tia en fid on C ny C om pa For example: press “h” to choice single chain or both chains in test mode.
2. Continuous Transmit Options: a. Before the continuous Transmit test, need to press “e” first The command will load the calibrate data to the EPROM, and then the card can transmit the target power. C on fid en tia l b. The channel frequency, data rate and output power could be changed in continuous transmit options. Press “c” to increase the output power, 11g Power ( data rate 6Mbps ) is 18dBm, 11b Power is 17dBm, press ESC to return to the main Test Options menu when finished. ny 3.
1.0 Scope 1.1 Document This document is to specify the product requirements for 802.11n Draft 2.0 Mini PCI. This mPCI is based on Atheros chip that complied with IEEE 802.11n Draft 2.0 from 2.4~2.5GHz, and it is also backward compatible to comply with IEEE 802.11g and IEEE 802.11b standard to connect your exist 802.11 b/g wireless LAN device. tia fid en Compatible with IEEE 802.11g high rate standard to provide wireless 54Mbps data rate Compatible with IEEE 802.
2.2 General Requirements 2.2.1 IEEE 802.11b Section Feature Detailed Description 2.2.1.1 2.2.1.2 Standard Radio and Modulation Schemes Operating Frequency Channel Numbers Ÿ Ÿ IEEE 802.11b DQPSK, DBPSK, DSSS, and CCK Ÿ 2400 ~ 2483.5MHz ISM band Ÿ Data Rate Media Access Protocol Transmitter Output Power Receiver Sensitivity Ÿ Ÿ 11 channels for United States/ Canada/ Taiwan 13 channels for Europe Countries 14 channels for Japan 11, 5.5, 2, and 1Mbps CSMA/CA with ACK Ÿ 802.11b: 24.
# Feature Detailed Description 2.2.3.3 2.2.3.4 Operating Frequency Channel Numbers Ÿ Ÿ 2.2.3.5 2.2.3.6 Data Rate Media Access Protocol Transmitter Output Power Receiver Sensitivity Ÿ Ÿ C on HT20 -88dBm at MCS0 Ÿ -84dBm at MCS1 Ÿ -81dBm at MCS2 Ÿ -78dBm at MCS3 Ÿ -75dBm at MCS4 Ÿ -70dBm at MCS5 Ÿ -69dBm at MCS6 Ÿ -68dBm at MCS7 Ÿ HT40 -85dBm at MCS0 Ÿ -81dBm at MCS1 Ÿ -78dBm at MCS2 Ÿ -75dBm at MCS3 Ÿ -72dBm at MCS4 Ÿ -67dBm at MCS5 Ÿ -66dBm at MCS6 Ÿ -65dBm at MCS7 Ÿ tia l draft 802.
2.3 Software Requirements The Configuration Software supports Linux driver. This configuration software includes the following functions: Information Information allows you to monitor network status. Ÿ Configuration Configuration allows you to configure parameters for wireless networking. Ÿ Security Supports enhanced security WEP, 802.1x, WPA and WPA2. tia l Ÿ 2.3.1 Security Feature Detailed Description 2.3.1.1 Encryption Ÿ Ÿ Ÿ 2.3.1.2 WEP Management Ÿ Ÿ 802.
2.7.3 Conditions Non-Operating Temperature Conditions Operating Humidity conditions Non-Operating Humidity Conditions Ÿ Ÿ Ÿ ℃. Neither subassemblies is damaged nor the operational performance is degraded when restored to the operating temperature after exposing to storage temperature in the range of –20 ℃ to +75 ℃. The product is capable of continuous reliable operation when subjected to relative humidity in the range of 10% and 90% non-condensing.
Appendix I: ny The parameters in the table are: C on fid en tia l Rate Dependent Parameters for High Throughput .
Federal Communication Commission Interference Statement en - Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. tia - l This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
tia l This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna, 3) For all products market in US, OEM has to limit the operation channels in CH1 to CH11 for 2.4G band by supplied firmware programming tool. OEM shall not supply any tool or info to the end-user regarding to Regulatory Domain change.
required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.). IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the IC authorization is no longer considered valid and the IC ID can not be used on the final product.