tia l User Manual For en WMP-ND03B 無線網路卡 C om pa ny C on fid Mini-PCI Card Version: 1.
This document contains confidential proprietary information and is the property of C om pa ny C on fid en tia l Alpha Networks Corporation. The contents of this document may not be disclosed to unauthorized persons without the written consent of Alpha Networks Corporation.
Revision History Rev. Date Author Reason for Changes 1.0 1.1 2008/3/14 2008/6/12 Alfred Chin Alfred Chin • • C om pa ny C on fid en tia l New release Add band 4 (5725~5850MHz) in item 2.2.1.3 and 2.2.4.
Contents TEST OPERATION MANUAL ................................................................................................................. 5 Test Utility Installation:......................................................................................................................... 5 Configuration: ........................................................................................................................................ 6 1.0 SCOPE....................................................
tia l Test Operation Manual 1. Unzip “ART_V0_5_b25ALL.zip” to “C:\”. 2. The utility must run on Win2000 or WinXP. Hardware Installation: Before insert the card, please execute the below instruction at first !! Win2000 OS : Enter in the directory : C:\ v0_5_b25ALL\art_driver\bin\2000 fid 1. Execute the uninst_new_drv_2k.bat: Execute the inst_new_drv_2k.bat : C on WinXP OS : Enter in the directory : C:\ v0_5_b25ALL\art_driver\bin\xp Execute the uninst_new_drv_xp.bat: Execute the inst_new_drv_xp.
Configuration: tia 2. l 1. Enter the DOS command mode , then change the directory to : C:\ v0_5_b25ALL\art_driver\bin\xp Input the instruction: art \id=2082 en Then press enter . ART TEST MODE: 1. Once utility is executed, a menu with test options will appear. To run a test, press fid the character key that is assigned to the test option. For example, press “c” to run the continuous transmit test, or press “r ” to run the continuous receive test.
3. Continuous Receive Options Continuous receive options will put the radio into receive mode to allow for fid en tia l radio measurements. Press ESC to return to the main Test Options menu when finished. 1.0 Scope on 1.1 Document This document is to specify the product requirements for 802.11 a/b/g/n Mini-PCI ny to connect your wireless LAN. C Card. This Card is based on Atheros chipset that complied with IEEE 802.11g, IEEE 802.11b, IEEE 802.11n standard from 2.4~2.
data rate Ÿ Compatible with IEEE 802.11 draft n standard to provide wireless 300Mbps data rate Ÿ Maximum reliability, throughput and connectivity with automatic data rate switching Ÿ Supports infrastructure networks via Access Point and ad-hoc network via 2.0 Requirements The following sections identify the detailed requirements of the 802.11n/ a or g/b en Mini-PCI Card. # Feature Detailed Description 2.2.1.1 2.2.1.2 Standard Radio and Modulation Type Operating Frequency Ÿ Ÿ on IEEE 802.
Detailed Description 2.2.2.1 2.2.2.2 Standard Radio and Modulation Schemes Operating Frequency Channel Numbers Data Rate Media Access Protocol Receiver Sensitivity at Antenna Connector Ÿ Ÿ IEEE 802.11b DQPSK, DBPSK, DSSS, and CCK Ÿ 2400 ~ 2483.5MHz ISM band Ÿ 11 channels for United States/ Canada/ Taiwan 13 channels for Europe Countries/ Japan 11, 5.5, 2, and 1Mbps CSMA/CA with ACK 2.2.2.4 2.2.2.5 2.2.2.6 2.2.2.
2.2.4 IEEE 802.11 Draft n Section # Feature Detailed Description 2.2.4.1 2.2.4.2 Standard Radio and Modulation Type Operating Frequency Ÿ Ÿ n n n n on MCS 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Ÿ 13.5 6.5 13 27 19.5 40.5 26 54 39 81 52 108 58.5 121.5 65 135 13 27 26 54 39 81 52 108 78 162 104 216 117 243 130 270 CSMA/CA with ACK Ÿ Typical Sensitivity at Which Frame (1000-byte PDUs) Error Rate = 10% and at room Temp.
n Ÿ 5GHz Band/HT-20 –84dBm at MCS0/8 –84dBm at MCS1/9 –82dBm at MCS2/10 –79dBm at MCS3/11 –77dBm at MCS4/12 –73dBm at MCS5/13 –72dBm at MCS6/14 –69dBm at MCS7/15 2.
2.3 Compatibility Requirements # Feature Detailed Description 2.3.1 Wi-Fi Ÿ 2.3.2 2.3.3 WHQL Physical Layer and Functionality Ÿ Ÿ tia Meet Wi-Fi certification for IEEE 802.11a/b/g/draft n product Meet applicable WHQL certification requirements Meet Alpha Networks Engineering Test Plan and Test Report 2.4 Regulatory Requirements Feature Detailed Description 2.4.1 United States 2.4.2 Europe 2.4.3 Japan 2.4.4 Taiwan IEEE 802.11a/n: EMI: FCC Part 15.407(b) Power Limits: FCC Part 15.
2.5 Requirements of Reliability, # Feature Detailed Description 2.5.1 2.5.2 2.5.3 MTBF Ÿ Ÿ Ÿ Mean Time Between Failure > 30,000 hours There is no scheduled preventive maintenance required The product quality is followed-up by Alpha Networks factory quality control system Feature Detailed Description 2.6.1 Operating Temperature Conditions Ÿ The product is capable of continuous reliable operation when operating in ambient temperature of 0 ℃ to +40℃. 2.6.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
band by supplied firmware programming tool. OEM shall not supply any tool or info to the end-user regarding to Regulatory Domain change. As long as 3 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.).
Caution: The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-channel mobile satellite systems. Because high power radars are allocated as primary users (meaning they have priority) in 5250-5350 MHz and 5650-5850 MHz, these radars could cause interference and/or damage to license exempt LAN devices.
integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate IC authorization. End Product Labeling The final end product must be labeled in a visible area with the following: “Contains TX IC : 4833A-WMPND03B”. Manual Information That Must be Included: This RF module in the user’s manual of the end product which integrates this module.
