User Manual

ManualsBrandsAlpha Networks ManualsComputers & Accessories802.11g Wireless Router

User Manual

802.11b/g Wireless Router

CG-WLBARGS

Summary of content (56 pages)

PAGE 1
CG-WLBARGS 802.
PAGE 2
PAGE 3
Contents WLBARGS฀Manual 1.฀Product฀Introduction ฀ 1.1฀Package฀Contents................................................................................... 3 ฀ 1.2฀฀Features..................................................................................................... 3 ฀ 1.3฀Hardware฀Introduction........................................................................ 4 2.฀Hardware฀Installation ฀ 2.1฀฀WLBARGS฀should฀be฀connecting฀to฀PC฀and฀modem............ 5 ฀ 2.2฀฀Installation฀Procedure฀............
PAGE 4
Contents WLBARGS฀Manual ฀ ฀ ...................................................... 30 ฀ ฀ ........................................... 33 ฀ ฀ ............................................. 34 ฀ ฀ ............................................................. 34 ฀ ฀ ................................................ 35 ฀ ฀ ...........................................
PAGE 5
1 Product฀Introduction WLBARGS฀Manual corega฀‘s฀WLBARGS฀is฀an฀advanced฀model฀of฀broadband฀Router฀as฀well฀as฀ a฀IEEE802.11g฀wireless฀access฀point฀which฀can฀speeds฀up฀to฀108Mbps.฀Its฀ management฀interface฀is฀straightforward฀for฀ease฀in฀setting฀up,฀while฀it฀supports฀various฀security฀features฀to฀effectively฀prevent฀hackers฀from฀attacking฀ your฀networks,฀such฀as฀ﬁrewall,฀WPA,฀Mac฀Address฀ﬁltering,฀VPN฀pass฀through,฀ hidden฀ESSID฀and฀no฀respond฀to฀the฀WAN฀ping฀function.
PAGE 6
WLBARGS฀Manual 1.3 Hardware Introduction Back Front 6 Bottom 1 2 3 4 AP R outer 7 11 5 ฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀ 8 9 ฀฀ 10 ฀ 1.฀Power฀LED฀(Green) Indicate฀power฀status 6.฀Detachable฀Antenna฀ Connector฀ 2.Status฀LED฀(Red) ON:Reboot/Hung฀up/FirmWare฀ upgrade 7.฀LAN฀port(1-4) Connected฀with฀PC฀ 3.฀WAN฀LED฀(Green) ON:฀Connected Blink:Transmitting฀or฀receiving฀ data 8.฀WAN฀port Connected฀with฀modem฀ 4.
PAGE 7
2 Hardware฀Installation WLBARGS฀Manual 2.1 WLBARGS should be connecting to PC and modem Following฀the฀steps฀below฀to฀set฀up฀WLBARGS฀and฀the฀connection. (1)฀Insert฀the฀cable฀connector฀into฀the฀Network฀Adapter฀embeded฀in฀PC,฀and฀ insert฀the฀other฀side฀into฀one฀of฀LAN฀ports฀(1~4)฀of฀the฀Router. (2)฀Insert฀the฀connect฀into฀the฀WAN฀port฀of฀the฀Router฀and฀insert฀the฀other฀side฀ into฀the฀WAN฀port฀of฀the฀modem. (3)฀Connect฀the฀Power฀Adapter,฀and฀plug฀in฀the฀AC฀power. Modem WAN LAN PC corega WLBARGS 2.
PAGE 8
PC฀Setting WLBARGS฀Manual 3 3.1 TCP/IP Configuration The฀following฀steps฀and฀screenshots฀maybe฀dissimilar฀in฀฀different฀operating฀systems.฀This฀manual฀takes฀Windows฀XP/200,฀95/98/ME,฀and฀Mac฀O/S฀as฀ examples: 3.1.1 Windows XP O/S (1)฀Enter฀[Control฀Panel]฀->฀click฀[Network฀Connection]฀->฀right฀click฀and฀select฀ [Open]. (2)฀Click฀[Local฀Area฀Connection]฀and฀right฀click฀and฀select฀[Properties].
PAGE 9
WLBARGS฀Manual (3)฀Click฀[General]฀->฀click฀[Internet฀Protocol฀(TCP/IP),฀and฀click฀[Properties]. (4)฀Click฀[General],฀select฀[Obtaining฀an฀IP฀Address฀Automatically],฀and฀[Obtain฀ DNS฀Server฀address฀automatically],฀and฀press฀[Advance].
PAGE 10
WLBARGS฀Manual (5)฀Click฀[DNS]฀tab,฀unselect฀[Register฀this฀connection’s฀address฀in฀DNS],฀and฀ press฀[OK]. (6)฀Go฀back฀to฀[Internet฀Protocol฀TCP/IP]฀and฀press฀[OK]. (7)฀Press฀[OK]฀to฀close฀[Local฀Area฀Connection฀Properties]. 3.1.2 Windows 2000 O/S (1)฀Go฀to฀[My฀Computer],฀and฀enter฀[Control฀Panel],฀click฀open฀[Network฀and฀ Dial฀Up฀Connections].
PAGE 11
WLBARGS฀Manual (2)฀Right฀click฀[Local฀Area฀Connection],฀and฀select฀[Properties] ฀*Note:฀Please฀check฀if฀TCP/IP฀had฀been฀installed฀in฀the฀[Local฀Area฀Connection].฀If฀not,฀ consult฀[Add฀TCP/IP]฀steps฀in฀this฀chapter. (3)฀Click฀[Internet฀protocol฀(TCP/IP)]฀and฀click฀[Properties].
PAGE 12
WLBARGS฀Manual (4)฀Select฀[Obtain฀an฀IP฀address฀automatically],฀and฀[Obtain฀DNS฀server฀address฀ automatically].฀And฀click฀[Advance]. ฀ (5)฀Click฀[DNS]฀tab฀in฀[Advance฀TCP/IP฀setting]฀page,฀and฀unselect฀[Register฀ this฀connection’s฀DNS฀address,฀and฀press฀[OK].
PAGE 13
WLBARGS฀Manual 3.1.3 Windows 98/95/ME O/S The฀configurations฀in฀all฀Windows฀98/95/ME฀are฀the฀same,฀and฀this฀manual฀ takes฀Windows฀98฀as฀an฀example. (1)฀Enter฀[Control฀Panel],฀and฀double฀click฀[Network]. (2)฀Click฀[Conﬁguration]฀tab,฀and฀select฀[TCP/IP],฀click฀[Properties]. (3)฀Select฀[IP฀Address],฀and฀select฀[Obtain฀IP฀address฀automatically.฀Press฀ [OK].
PAGE 14
WLBARGS฀Manual ฀(4)฀Click฀[Gateway]฀tab,฀remove฀all฀the฀gateways,฀and฀press฀[OK]฀to฀close฀the฀window. (5)฀Go฀to฀[Network]฀and฀press฀[OK]฀to฀close฀the฀page. (6)฀The฀[Restart฀the฀windows]฀screen฀will฀pop-up,฀press฀[OK]฀to฀restart฀the฀PC.฀If฀ the฀PC฀is฀not฀shown฀this฀message,฀restart฀the฀PC฀manually. 3.1.4 Mac OS 8.x~9.x O/S (1)฀Open฀the฀[TCP/IP]฀conﬁguration฀from฀[Control฀Panel]. (2)฀Select฀[Ethernet฀Network]฀in฀the฀[connection฀methods];฀select฀[DHCP฀server]฀ in฀[Conﬁguration],฀and฀close฀this฀page. 3.1.
PAGE 15
WLBARGS฀Manual 3.2 Browser Configuration 3.2.1 Windows O/S The฀following฀examples฀are฀for฀Windows฀XP฀O/S,฀skip฀this฀chapter฀if฀you฀are฀ using฀Windows฀200/98/ME. (1)฀Open฀Internet฀Explorer฀(IE฀6.0),฀select฀[Tools]฀menu฀and฀click฀[Internet฀Options].฀If฀a฀ [Dial-up฀Connection]฀window฀is฀pop-up,฀close฀it,฀and฀do฀not฀connect฀to฀the฀Internet฀ now. (2)฀Click฀[Connections]฀tab฀->฀select฀[Never฀dial฀a฀connection]฀->฀click฀[LAN฀Settings].
PAGE 16
WLBARGS฀Manual (3)฀Unselect฀all฀three฀options฀in฀the฀฀[Local฀Area฀Network฀LAN฀Setting].฀฀ ฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀ ฀ (4)฀Press฀[OK]฀in฀the฀[Internet฀Options]. 3.2.2 Mac O/S (1)฀Open฀Internet฀Explorer฀(IE฀5.0)฀Go฀to฀[Edit]฀in฀the฀menu฀bar,฀select฀[Internet฀ Explorer฀Preferences]. (2)฀Select฀[Proxies]฀options฀in฀[Network]฀on฀the฀left-side฀conﬁguration฀items. (3)฀Do฀not฀select฀[Web฀Proxy],฀press฀[OK].
PAGE 17
4 Network฀Conﬁguration WLBARGS฀Manual 4.1 Quick Network Configuration Basic฀configuration฀is฀required฀before฀connection฀your฀computer฀to฀the฀internet฀via฀WLBARGS.฀The฀connection฀methods฀may฀be฀differed฀by฀your฀contract฀ to฀the฀ISP.฀Please฀reconfirm฀your฀connection฀conditions฀with฀your฀ISP฀prior฀to฀ configure฀this฀router.฀The฀configuration฀procedures฀are฀as฀follow: *Note:฀Anti-virus฀or฀Firewall฀software฀may฀prevent฀this฀router฀from฀being฀set-up฀ properly.
PAGE 18
WLBARGS฀Manual (5)฀Please฀select฀your฀region.฀e.g.)฀Singapore.฀Click฀on฀[Save]. ฀ (6)฀Click฀[Quick฀Installation฀Setting],฀and฀click฀[Next]฀to฀enter฀the฀Setup฀Wizard. (7)฀When฀seeing฀this฀screen฀shot,฀click฀on฀[Next].
PAGE 19
WLBARGS฀Manual (8)฀Select฀your฀connection฀type.฀Please฀make฀sure฀that฀your฀ADSL฀connection฀ type฀is฀correct฀as฀you฀enter;฀the฀correct฀information฀can฀be฀obtained฀from฀ the฀documents฀given฀by฀your฀ISP.฀If฀not,฀consult฀with฀your฀ISP฀before฀setting. 4.1.1฀Auto฀obtain฀IP฀(DHCP) ฀(1)฀If฀you฀are฀subscribing฀to฀auto฀obtain฀IP฀service฀(฀or฀DHCP฀Dynamic฀IP)฀ from฀your฀ISP,฀such฀as฀Cable฀Modem฀that฀obtain฀an฀IP฀automatically฀for฀ connection,฀please฀select฀[Auto฀obtain฀IP(DHCP)].฀Click฀on฀[Next].
PAGE 20
WLBARGS฀Manual (2)฀Press฀[Mac฀address฀clone]฀to฀obtain฀the฀Ethernet฀card’s฀Mac฀address.฀Then฀ press฀[Next]. (3)฀Click฀on฀[Save]฀to฀perform฀connection฀tests.
PAGE 21
WLBARGS฀Manual (4)฀Within฀seconds,฀the฀result฀of฀the฀connection฀test฀will฀be฀appeared฀in฀the฀ dialogue฀box฀to฀indicate฀the฀connection฀status.฀When฀[Connection฀ok]฀ appears,฀click฀on฀[Close]. (5)฀Open฀the฀web฀browser฀(IE฀6.0),฀and฀test฀with฀any฀website฀for฀testing฀the฀ connection. *฀Note:฀if฀the฀connection฀to฀the฀website฀fails.฀Restart฀your฀Cable฀Modem,฀and฀check฀the฀ installation฀of฀CG-WLABARGS฀properly,฀such฀as฀the฀LAN/WAN฀connections.฀After฀ verifying฀that,฀restart฀this฀chapter฀again฀for฀installation.
PAGE 22
WLBARGS฀Manual (2)฀Conﬁgure฀the฀network฀setting฀provided฀by฀your฀ISP.฀Then฀click฀on฀[Next]. (3)฀Click฀on฀[Save]฀to฀perform฀connection฀tests.
PAGE 23
WLBARGS฀Manual (4)฀Within฀seconds,฀the฀result฀of฀the฀connection฀test฀will฀be฀appeared฀in฀the฀ dialogue฀box฀to฀indicate฀the฀connection฀status.฀When฀[Connection฀OK]฀ appears,฀click฀on฀[Close]. (5)฀Open฀the฀web฀browser฀(IE฀6.0),฀and฀test฀with฀any฀website฀for฀testing฀the฀ connection. *Note:฀If฀the฀connection฀to฀the฀website฀fails.฀Please฀make฀sure฀the฀data฀you฀entered฀are฀ correct฀,฀or฀any฀mistake฀occured฀in฀the฀process฀of฀the฀installation,฀such฀as฀the฀ LAN/WAN฀connections.
PAGE 24
WLBARGS฀Manual (2)฀Enter฀the฀username฀and฀password฀provided฀by฀your฀ISP,฀and฀click฀on฀[Next]. ＊Note:฀If฀you฀are฀a฀Hinet฀subscriber,฀type฀@hinet.net฀following฀the฀8-digit฀account฀ number,฀for฀instance:฀xxxxxxxx@hinet.net.฀Be฀careful,฀username฀and฀password฀ are฀sensitive฀to฀capitals. ฀ (3)฀Click฀on฀[Save]฀to฀perform฀connection฀tests.
PAGE 25
WLBARGS฀Manual (4)฀Within฀seconds,฀the฀result฀of฀the฀connection฀test฀will฀be฀appeared฀in฀the฀ dialogue฀box฀to฀indicate฀the฀connection฀status.฀When฀[Connection฀OK]฀ appears,฀click฀on฀[Close]. (5)฀Open฀the฀web฀browser฀(IE฀6.0),฀and฀test฀with฀any฀website฀for฀testing฀the฀ connection. *Note:฀If฀the฀connection฀to฀the฀website฀fails.฀Please฀make฀sure฀the฀data฀you฀entered฀are฀ correct฀,฀or฀any฀mistake฀occured฀in฀the฀process฀of฀the฀installation,฀such฀as฀the฀ LAN/WAN฀connections.
PAGE 26
WLBARGS฀Manual Splitters Link฀to฀telephone ฀ Modem ฀ ฀ Power฀Adapter RJ-45 Hereunder฀is฀the฀setting฀on฀Centrino฀Notebook฀as฀an฀example,฀for฀wireless฀ adopters฀in฀other฀brands,฀please฀refers฀to฀the฀original฀manuals. (1)฀Go฀[Control฀Panel]฀->฀double฀click฀on฀[Network฀connection]฀->฀right฀click฀on฀ [Wireless฀Network฀฀Connection]฀->฀select฀[properties]฀->฀click฀on฀[Wireless฀ Network]฀tab฀->฀select฀[Use฀Windows฀to฀conﬁgure฀my฀wireless฀networks฀ setting]฀,฀and฀press฀[OK].
PAGE 27
WLBARGS฀Manual (2)฀Go฀[Control฀Panel]฀-฀[Network฀connection]฀again฀->฀click฀[Wireless฀network฀ connection]฀and฀hold฀right฀button฀to฀select฀[Available฀wireless฀network฀ connection],฀choose฀one฀available฀network฀e.g.฀)฀corega฀,฀and฀click฀[Connect]. (3)฀Connection฀status฀will฀appear฀in฀the฀bottom฀right฀of฀the฀screen.
PAGE 28
WLBARGS฀Manual (2)฀Go฀[Control฀Panel]฀-฀[Network฀connection]฀again฀->฀click฀[Wireless฀network฀ connection]฀and฀hold฀Mouse’s฀right฀button฀to฀select฀[Available฀wireless฀ network฀connection],฀฀e.g.฀)฀corega฀,฀and฀click฀[Connect]. (3)฀Connection฀status฀will฀appear฀in฀the฀bottom฀right฀of฀the฀screen. ฀฀*Note:฀The฀wireless฀connection฀has฀been฀established฀now.฀Please฀go฀to฀corega’s฀ website฀at฀http://www.corega-asia.com฀to฀check฀the฀connection฀to฀the฀Internet.
PAGE 29
5 Wireless฀Security฀Conﬁguration WLBARGS฀Manual To฀prevent฀from฀unlawful฀access฀to฀your฀network,฀you฀are฀recommended฀ to฀perform฀wireless฀security฀setting.฀Enter฀the฀function฀menu,฀ad฀click฀on฀ [802.11g/b฀Security฀setting]฀item.฀And฀select฀WEP฀or฀WPA฀setting. 5.1฀WEP฀Setting In฀order฀to฀prevent฀your฀information฀from฀being฀hacked,฀it฀is฀recommended฀to฀use฀WEP฀ encryption฀when฀using฀wireless฀connection. ฀ (1)฀[Open฀System]฀or฀[Shared฀Key].Select฀[Open฀System]฀or฀[Share฀Key]฀from฀ Authentication฀menu.
PAGE 30
WLBARGS฀Manual (5)฀Recommended฀to฀keep฀default฀values฀of฀[DTIM]฀and฀[Preamble฀Mode]. (6)฀Save฀your฀settings฀by฀[Apply]. (7)฀Parameters฀can฀be฀output฀by฀[Output฀Info.] 5.2฀WPA Setting WPA฀is฀encrypted฀by฀a฀periodic฀update,฀making฀it฀more฀difﬁcult฀to฀be฀hacked.฀Home฀users฀ and฀company฀users฀are฀recommended฀to฀use฀฀and฀฀respectively. (1)฀Select฀[WPA2-PSK]฀or฀[WPA/WPA2-PSK]฀in฀the฀column฀of฀[Authentication]฀ (Recommended). a.
PAGE 31
WLBARGS฀Manual (4)฀Recommended฀to฀keep฀default฀values฀of฀[DTIM]and฀[Rekey฀Interval]. (5)฀Press฀[Apply]฀to฀save฀setting.฀ (6)฀Parameters฀can฀be฀output฀by฀[Output฀Info]. (1)฀Select฀[WPA2-EAP]฀or฀[WPA/WPA2-EAP](Recommended).฀in฀the฀column฀of฀ [Authentication]฀ a.฀ [WPA2-EAP]:฀The฀2nd฀generation฀encryption฀skill฀performs฀stricter฀protection฀than฀before.฀฀Before฀selection,฀please฀check฀the฀function฀availability฀ of฀your฀network฀adapter,฀or฀select฀b. b.
PAGE 32
Function฀Introduction WLBARGS฀Manual 6 The฀chapter฀will฀briefly฀introduce฀all฀functions฀of฀this฀product,฀and฀spell฀them฀ out.฀฀Log฀in฀the฀management฀program฀and฀the฀below฀interface฀will฀appear. 6.1 Features Wireless฀Function Wireless฀Enable:฀enable฀the฀wireless฀function. Wireless฀Disable:฀disable฀the฀wireless฀function. ฀ The฀internet฀setting฀can฀be฀configured,฀according฀to฀your฀internet฀connection฀ type,฀[Link฀connection฀speed]฀-฀default฀setting฀is฀recommended.
PAGE 33
WLBARGS฀Manual A.฀For฀auto฀obtain฀IP฀(DHCP):฀ Type Press฀[MAC฀clone]฀to฀obtain฀the฀Ethernet฀card's฀Mac฀ address. Domain฀name Please฀refer฀to฀your฀ISP฀internet฀service฀information,฀ add/edit฀[Domain฀name]. Computer฀ name Please฀refer฀to฀your฀ISP฀internet฀service฀information,฀ add/edit฀[Computer฀name]. MTU฀value Maximum฀Transmission฀Unit.deafault฀setting:1500฀ Byte. DNS฀server Select฀[Auto฀Setting]฀or฀[Manual฀Setting]฀to฀conﬁgure฀ DNS1฀and฀DNS2฀servers. B.
PAGE 34
WLBARGS฀Manual Username฀ Password฀ Conﬁrm฀ password Connection฀ type Please฀enter฀username,฀given฀by฀your฀ISP. Please฀enter฀password,฀given฀by฀your฀ISP. Please฀type฀your฀password฀again. [Auto฀Reconnect]:฀฀always฀on฀line฀(recommended). [On฀Demand]:฀connect฀when฀accessing฀to฀Internet. [manual฀connection]:฀manually฀connecting฀to฀internet.฀ MTU฀value฀฀฀฀฀฀฀฀฀ Maximum฀Transmission฀Unit.฀when฀[Auto฀Reconnect]฀is฀ disable,฀MTU฀can฀be฀edited.฀Default฀setting:฀1454฀Byte.
PAGE 35
WLBARGS฀Manual WAN฀ip฀address Subnet฀mask Default฀gateway MTU DNS฀server Please฀refer฀to฀your฀ISP฀internet฀service฀ information. Maximum฀Transmission฀Unit.฀Deafault฀setting฀:1500฀ Byte. When฀[Manual฀Connection]฀is฀enable,฀two฀DNS฀ server฀addresses฀can฀be฀inserted:฀DNS1฀and฀DNS2 Dynamic฀DNS฀is฀a฀connection฀of฀LAN’s฀virtual฀server฀through฀URL฀internet฀access฀or฀ called฀dynamic฀IP฀(No฀fixed฀IP฀address)฀that฀also฀can฀connect฀through฀URL฀internet฀access.
PAGE 36
WLBARGS฀Manual (1)฀select฀available฀dynamic฀DNS฀services. (2)฀enter฀username฀for฀dynamic฀DNS. (3)฀enter฀passwod฀for฀dynamic฀DNS. (4)฀enter฀domain฀name. (5)฀IP฀update฀interval. (6)฀Click฀[Apply]. Direct฀PPPoE PPPoE฀pass-through฀function฀enable/disable. VPN฀pass฀through VPN฀pass-through฀function฀enable/disable. 34 LAN฀IP฀address The฀device฀ip฀address,฀not฀recommended฀to฀ change฀this฀address.Default฀setting:฀[192.168.1.1].
PAGE 37
WLBARGS฀Manual (1)฀Select฀[Enable]฀to฀enable฀DHCP฀server฀function.฀Default฀is฀[enable]. (2)฀Enter฀DHCP฀servers฀start฀ip฀and฀end฀ip. (3)฀Then฀click฀on฀save฀button฀to฀save฀the฀setting. the฀following฀table฀display฀the฀current฀connected฀users฀information,฀you฀can฀ add/edit/delete฀users฀data. *Add฀a฀pc฀data฀:฀click฀on฀[add]฀to฀add฀a฀new฀user฀data.
PAGE 38
WLBARGS฀Manual (1)฀Enter฀the฀pc฀name฀and฀select฀network฀connection฀type. (2)฀Conﬁgure฀the฀mac฀address฀data. (3)฀Click฀[Add฀PC฀Data]฀to฀complete฀the฀setting. ESSID฀ Default฀ESSID฀is฀[corega]. Mode฀ .฀802.11b/g:฀auto฀connect฀in฀either฀802.11b฀or฀802.11g. .฀802.11g:฀connect฀in฀802.11g฀(54Mbps)฀mode. Channel฀ When฀there฀is฀interruption,฀other฀channels฀can฀be฀ selected. SuperG฀mode฀ If฀your฀Wireless฀LAN฀Card฀supports฀Super฀G฀Mode฀ transmit฀rate.
PAGE 39
WLBARGS฀Manual Wireless฀ to฀wireless฀ communication฀฀ Conﬁgure฀wireless฀communication฀between฀clients. [Enable]/[Disable]:฀enable฀or฀disable฀wireless฀ communication฀between฀clients. Wireless฀to฀wire฀฀ communication Conﬁgure฀wireless฀and฀wired฀communication฀ between฀clients. [Enable]/[Disable]:฀enable฀or฀disable฀connection฀ between฀wireless฀and฀wired฀communication. MAC฀address฀ﬁlter฀ Use฀MAC฀address฀ﬁlter฀to฀control฀network฀ list communication.
PAGE 40
WLBARGS฀Manual (3)฀Select฀one฀of฀protocol. (4)฀Enter฀the฀range฀of฀limited฀port฀number. (5)฀Select฀one฀of฀the฀time฀schedule฀limitations.฀฀ (6)฀After฀clicking฀on฀[Time฀Setting]฀button,฀a฀time฀schedule฀table฀is฀shown,฀once฀ complete฀the฀setting,฀please฀click฀on฀[save]฀button฀to฀store฀the฀information. ฀฀฀฀ This฀function฀can฀forbid฀certain฀users฀or฀website฀on฀the฀network: (1)฀Enter฀ﬁlter฀description. (2)฀Enter฀the฀forbidden฀user฀ip฀range.
PAGE 41
WLBARGS฀Manual Virtual฀server฀is฀an฀appointed฀port฀opened฀by฀the฀PC฀in฀connection฀with฀the฀ product,฀allowing฀other฀users฀connecting฀up฀via฀WAN.฀฀Open฀servers฀or฀special฀ online฀games฀can฀take฀advantage฀of฀this฀function.฀฀Setting฀processes฀are฀as฀ follows: (1)฀Select฀a฀PC฀to฀be฀the฀virtual฀server. (2)฀Select฀Service.฀ (3)฀Enter฀Port฀Range฀of฀internet฀connection฀with฀the฀server,฀and฀Port฀Range฀ used฀by฀the฀server฀software. (4)฀Select฀Protocol.
PAGE 42
WLBARGS฀Manual *Note:฀ 1.฀The฀PC฀becomes฀vulnerable฀to฀being฀hacked฀if฀DMZ฀function฀starts.฀฀Please฀only฀use฀ it฀in฀need. 2.฀The฀PC฀with฀DMZ฀function฀needs฀a฀ﬁxed฀IP฀address. 3.฀DMZ฀function฀can฀only฀be฀used฀in฀one฀PC. Activating฀this฀function฀can฀detect฀the฀device฀or฀software฀of฀LAN,฀supporting฀UPnP.฀฀For฀ example:฀online฀games฀supporting฀UPnP฀or฀Windows฀Messenger฀(Ver.฀4.7฀or฀above),฀MSN฀ Messenger฀(Ver.฀5.0฀or฀above)฀and฀so฀forth.฀฀Set฀its฀status฀usable.
PAGE 43
WLBARGS฀Manual Admin฀login฀name฀฀ User฀name฀for฀login฀this฀management฀program. Default฀setting฀is฀[root]. Admin฀login฀password฀฀ Default฀password฀is฀empty. Password฀comﬁrmation Please฀retype฀password. Connection฀Timeout Enter฀connection฀time-out฀time. Time฀setup฀฀ The฀default฀value฀is฀[Auto฀Setup]. Back฀to฀default฀setting Click฀[Proceed]฀to฀restore฀all฀default฀values. Reboot New฀changes฀only฀effect฀after฀the฀system฀reboots.฀ Save฀Setting Click฀[Save]฀to฀save฀your฀setting฀values฀as฀a฀ﬁle.
PAGE 44
WLBARGS฀Manual *Remote฀control The฀setting฀allows฀accessing฀the฀management฀program฀via฀remote฀control. ฀The฀activation฀processes฀are฀as฀follows: (1)฀Select฀[Enable]. (2)฀Indicate฀1฀~฀9600฀for฀parameters฀of฀port฀range.฀e.g.฀)฀8080฀(Recommended฀ keeping฀default฀values). (3)฀Click฀on฀[Apply]฀after฀completing฀settings.฀ e.g.฀)฀Assume฀the฀port฀value฀is฀8080,฀enter฀IP฀address฀as฀the฀type฀:฀ [http://xxx.xxx.xxx.xxx:฀80]฀to฀access฀the฀management฀program฀by฀remote฀ control.
PAGE 45
WLBARGS฀Manual Connection฀status฀log฀is฀displayed฀in฀the฀table. ฀ ฀ Dos฀attack฀log฀is฀displayed฀in฀a฀table. DHCP฀server฀log฀is฀displayed฀in฀a฀table.
PAGE 46
WLBARGS฀Manual System฀log฀is฀displayed฀in฀the฀table. An฀E-mail฀address฀can฀be฀set฀below.฀฀Special฀incidents฀will฀be฀recorded฀and฀ sent฀to฀the฀appointed฀E-mail฀address.฀฀After฀entering฀all฀information,฀click฀ [Save]฀to฀save฀and฀complete฀the฀setting. 6.2 Additional Functions Besides฀the฀functions฀displayed฀in฀the฀tables,฀there฀are฀some฀additional฀ features฀available฀to฀set฀up.฀฀Please฀open฀the฀IE฀browser฀and฀enter฀192.168.1.1/ core_rc.
PAGE 47
WLBARGS฀Manual Two฀DNS฀server฀addresses฀can฀be฀set฀in฀the฀table.฀฀If฀the฀primary฀DNS฀server฀ does฀not฀function,฀the฀system฀will฀use฀them฀as฀secondary฀addresses. Add/฀Edit/฀Delete฀static฀router฀can฀be฀set฀in฀the฀table.฀฀After฀key-in฀of฀static฀ router฀information,฀click฀[Save].฀฀The฀setting฀log฀will฀be฀displayed฀afterward. The฀table฀allows฀dynamic฀routing฀setting.
PAGE 48
AP/Router฀Switching WLBARGS฀Manual 7 ฀If฀you฀would฀like฀to฀use฀AP฀(Access฀Point)฀function,฀please฀use฀the฀switch฀button฀in฀the฀bottom฀of฀the฀product.฀฀The฀operations฀are฀as฀the฀below: (1)฀Cut฀off฀the฀power. (2)฀Switch฀AP/Router฀to฀the฀left฀(AP฀side). AP R outer (3)฀Plug฀in฀the฀product. (4)฀Now฀the฀product฀is฀in฀AP฀mode.฀฀Open฀browser฀to฀access฀setting฀page฀and฀ enter฀[192.168.1.220]฀into฀the฀address฀bar,฀then฀press฀[Enter]. **฀Warrning฀** This฀is฀a฀special฀application.
PAGE 49
8 FAQ WLBARGS฀Manual When฀the฀installation฀fails฀or฀the฀connection฀doesn’t฀succeed,฀it’s฀recommended฀to฀take฀the฀following฀actions฀against฀the฀problems. (1)฀Find฀your฀problem฀in฀the฀troubleshooting฀collection. (2)฀Go฀to฀our฀ofﬁcial฀website฀at฀http://www.corega-asia.com,฀then฀click฀ [Support]฀and฀click฀the฀[Online฀Customer฀Support]฀item.฀To฀ﬁll฀the฀form฀ page฀and฀note฀following฀information฀฀We฀will฀contact฀you฀as฀soon฀as฀ possible. •฀Product฀name:฀e.g.
PAGE 50
WLBARGS฀Manual ฀(9)฀Are฀the฀settings฀of฀your฀web฀browser฀correct? ฀ Q2.฀Not฀able฀to฀log฀in฀the฀management฀program. A:฀You฀have฀4฀ways฀to฀check฀and฀solve฀the฀problem: (1)฀Close฀and฀re-open฀the฀IE฀browser฀and฀login฀the฀program฀again. (2)฀Log฀out฀and฀re-login฀the฀Windows฀OS.฀Then฀login฀the฀program฀again. (3)฀Probably฀the฀management฀program฀is฀accessed฀from฀the฀other฀user.฀Wait฀ until฀that฀user฀exits฀the฀program. (4)฀Reset฀to฀default฀settings฀(Refer฀to฀Q8.฀for฀more฀details)฀and฀re-login฀the฀ program.฀ Q3.
PAGE 51
WLBARGS฀Manual (1)฀Click฀[Start]฀=>฀Click฀[Run]. (2)฀Input฀[winipcfg]฀in฀the฀column฀=>฀press฀[Enter]. (3)฀Select฀your฀network฀adapter฀to฀display฀IP฀address.฀฀The฀IP฀should฀be฀ 192.168.1.1,if฀none,฀please฀click฀[Release]฀=>฀Click฀[Renew]. Q7.฀How฀to฀reboot฀the฀product? A:฀Reboot฀to฀get฀new฀setting฀values฀applied.฀฀The฀steps฀are฀as฀follows:฀open฀the฀ management฀program->฀Click฀on฀[Management]->฀Click฀on฀[Proceed]฀in฀the฀ [Reboot]฀column.
PAGE 52
Speciﬁcations WLBARGS฀Manual 9 Compliance฀Standard฀ WLAN:฀IEEE802.11/IEEE802.11b/IEEE802.11g LAN:฀IEEE802.3/IEEE802.3u/IEEE802.3x฀฀฀฀฀฀฀฀฀฀฀฀ Interface฀ ฀ WAN:฀10/100Mbps฀x฀1฀Port฀(RJ-45,฀Auto฀MDI/MDI-X) LAN:฀10/100Mbps฀x฀4฀Ports฀(RJ-45,฀Auto฀MDI/MDI-X) Frequency฀Band 2.412~2.462฀GHz Transmission฀speed IEEE802.11b:฀11/5.5/2/1Mbps IEEE802.11g:฀54/48/36/24/18/12/9/6Mbps Transmission฀Power 19฀dBm dBm / 11g：20.5 dBm 11b：19.
PAGE 53
About฀corega WLBARGS฀Manual corega可瑞加科技於1996年成立於日本新橫濱，致力於提供多元化的家用網路產品：包括乙太網路交換器、無線區域網路系列產品、路由器、藍芽系列產品、以及與網路相關的產品應用及服務。corega目前已是日本專業家用網路產品的暢銷品牌，並且於฀2002年2月於台北成立可瑞加科技，專注於台灣市場推廣高品質的日系家用網路設備。corega以使用者的需求導向為最重要的營運方針，多樣化的產品行銷以及通路服務營造corega為最親切適用的家庭網路設備第一品牌！竭誠感謝您購買corega可瑞加系列產品，期待本產品為您帶來更快速便捷的連線體驗，更期盼日後您家用網路擴充/升級的機會，corega能繼續陪伴您！ corega฀K.K.
PAGE 54
Appendix WLBARGS฀Manual Federal Communication Commission Interference Statement Federal฀Communication฀Commission฀Interference฀Statement This equipment has been tested and found to comply with the limits for a Class B digital This฀equipment฀has฀been฀tested฀and฀found฀to฀comply฀with฀the฀limits฀for฀a฀Class฀B฀ device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide digital฀device,฀pursuant฀to฀Part฀15฀of฀the฀FCC฀Rules.
PAGE 55
PAGE 56
www.corega.com.tw www.corega-asia.com corega Taiwan Inc. 7F.,฀No.฀10,฀Lane฀345,฀YangGuang฀St.฀Nei-Hu฀ Chiu,฀Taipei฀City฀114,฀Taiwan฀R.O.C. TEL:฀฀+886-2-8751-9164฀฀฀FAX:฀฀+886-2-8751-9174 PN: ฀T30-UM8409-00฀Rev.