Product External Specifications For 802.11b/g/n 2x2 USB Module (MTK RT5372) Customer : TPV Model P/N TPV : 317GAAWF506ALP Alpha : TPWUSN24V2A1G Model Number: WUS-N24V2 Version : 1.
Revision History Rev. Date Author Reason for Changes 1.0 1.1 1.2 1.
Contents OPERATION MANUAL ....................................................................................................................................................... 4 1.0 SCOPE ............................................................................................................................................................................... 5 1.1 DOCUMENT....................................................................................................................................
Operation Manual i. Install Driver 1. install the test driver 2.
3. RX signal command (1) select TX/RX site (2) select channel,datarate and chain 0/1 1.1 Scope 1.2 Document This document is to specify the product requirements for 802.11n USB Module with onboard metal antenna . This USB module is based on MTK Ralink single chip that complied with 802.11n standard from 2.4~2.5GHz, and it can be used to provide up to 11Mbps for IEEE 802.11b, 54Mbps for IEEE 802.11g and 300Mbps for 802.11n to connect your wireless LAN.
• Supports infrastructure networks via Access Point and ad-hoc network via peer-to-peer communication • Supports WEP, 802.1x, WPA and WPA2 enhanced security • Friendly user configuration and diagnostic utilities • Drivers support Windows XP , Vista, Win7. • 6-pin pitch connector USB interface • RoHS compliant • Antenna type : Two onboard metal Antenna 2.0 Requirements The following sections identify the detailed requirements of 802.
2.1 Functional Block Diagram 2.2 General Requirements 2.2.1 IEEE 802.11b Section # Feature Detailed Description 2.2.1.1 2.2.1.2 Standard Radio and Modulation Schemes Operating Frequency Channel Numbers • • IEEE 802.11b DQPSK, DBPSK, DSSS, and CCK • 2400 ~ 2483.5MHz ISM band • Data Rate Media Access Protocol Transmitter Output Power • • 11 channels for United States 13 channels for Europe Countries and other regions 11, 5.5, 2, and 1Mbps CSMA/CA with ACK 2.2.1.3 2.2.1.4 2.2.1.5 2.2.1.6 2.2.1.
2.2.2 IEEE 802.11g Section # Feature Detailed Description 2.2.2.1 2.2.2.2 Standard Radio and Modulation Schemes Operating Frequency Channel Numbers • • IEEE 802.11g BPSK, QPSK, 16QAM, 64QAM, and OFDM • 2400 ~ 2483.5MHz ISM band • Data Rate Media Access Protocol Transmitter Output Power • • 11 channels for United States 13 channels for Europe Countries and other regions 6,9,12,18,24,36,48,54Mbps CSMA/CA with ACK 2.2.2.3 2.2.2.4 2.2.2.5 2.2.2.6 2.2.2.7 2.2.2.8 Receiver Sensitivity 2.2.2.
# Feature Detailed Description 8 9 10 11 12 13 14 15 2.2.3.5 2.2.3.6 Media Access Protocol Transmitter Output Power at Antenna Connector 2.2.3.7 Receiver Sensitivity at Antenna Connector 2.2.3.8 Receiver Maximum Input Level 13 26 39 52 78 104 117 130 27 54 81 108 162 216 243 270 14.444 28.889 43.333 57.778 86.667 115.556 130.000 144.444 30 60 90 120 180 240 170 300 • CSMA/CA with ACK • Typical RF Output Power at each RF chain, Data Rate and at room Temp. 25degree C • • • • • • • • • • 2.
2.2.4.2 2.2.4.3 2.2.4.4 Operating Voltage Current Consumption Interface • • 3.3VDC +/- 10% 450mA at continuous transmit mode @HT40 MCS0 315mA at receive mode w/o receiving packet @HT40 MCS0 6-pin pinch connector , wafer • 2.3 Software Requirements The Configuration Software supports Microsoft Windows XP, Vista, Win7. This configuration software includes the following functions: • Information Information allows you to monitor network status.
# Feature Detailed Description 2.3.3.4 WPA/WPA2 • • Support WPA/WPA2-PSK and WPA/WPA2-EAP Support Cipher Mode AES and TKIP 2.4 Mechanical Requirements # Feature Detailed Description 2.4.1 2.4.2 Length Width • • 100mm ± 0.005mm (PCB) 17mm ±0.005mm (PCB) 2.5 Compatibility Requirements This device passes the following compatibility requirements. # Feature Detailed Description 2.5.1 2.5.2 Wi-Fi Physical Layer and Functionality • • Meet Wi-Fi certification for IEEE 802.
2.7 Environmental Requirements # Feature Detailed Description 2.7.1 Operating Temperature Conditions Non-Operating Temperature Conditions Operating Humidity conditions Non-Operating Humidity Conditions • The product is capable of continuous reliable operation when operating in ambient temperature of 0 ć to +50ć.
Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required.
