Manual

Preliminary
11
AIP900-0012-B0-001 Rev. A (01/2012)
1.3 System Components
The ACS HP Series Battery Charger is comprised of a number of individual subsystems designed to
worktogethertoprovidehighlyreliable,lteredpowerinsupportoftheload.Atypicalsystemwill
contain the following:
1
2
3
4
5
7
1. Blank equipment panel.
2. Cordex4.4kWrectiersLoadedontopre-installed
shelf.Theshelfcontainsuptovehot-swappable
4400WRectiermodules.TheRectiersareusedas
the charging component of a hybrid “UPS” system.
3. Cordex Controller CXCR: Controls the entire AC
and DC power system. Provides web-based and
localdisplayinterfacetosetcongurablefeatures
ofInvertersandRectiermodules,batterycharging
voltages, and system-wide alarms.AC Output
Distribution Panel: DIN rail circuit breakers can be
installed to feed individual AC load circuits.
4. Main breaker panel: Serves as main disconnect for
the Inverter AC input.
5. Auxiliary/Distribution breaker panel
6. Blank equipment panel.
7. Perforated ventilation panel.
6
Fig.1-2,ConguredChargerSystem
1.0 Introduction