Manual

Preliminary
15
AIP900-0012-B0-001 Rev. A (01/2012)
2.3 Electrical Connection and Wiring
Always refer to the ACS system electrical schematic diagram for proper installation.
Before connecting the ACS Series Battery Charger insure that:
The battery is disconnected (if applicable)
The circuit breakers are “OFF”
The relays, fuses and circuit boards are installed
The unit is wired in accordance with the instructions (refer to the wiring connections and
electrical diagram)
Wiresizeisveryimportant.Thenameplateprovidestheessentialinformationregardingtheinputand
output voltages and currents. Refer to your Local or National Electrical Code for WIRE GAUGE and
GROUNDING instructions.
CAUTION!
WARNING!
Wireamperecapacitymustbesizedtothemaximalcorrespondentcurrent.Correctvoltageand
polarity are of critical importance. Check all connections for tightness and polarity. Connect battery (if
applicable) to the output terminals observing its polarity.
2.0 Installation