Instruction Manual

28 745-814-B0-001, Rev. A
5.0 Upgrading Firmware, continued
5.2 Upgrading XP-DSM Transponder Firmware, continued
5.2.2 Upgrading XP-DSM Firmware Using a DSM Setup File, continued
3. Include in the atidoc01.cfg Setup File the following Alpha MIB parameters and
values:
4. Load the atidoc01.cfg setup le onto the TFTP server.
5. Within 24 hours all XP-DSMs on the network will begin downloading the new
rmware.
Parameter Local Port Parameter Value
atiMgmtSysDownloadReCfgTime
[Counters] RECONFIG TIMER
0 (disable automatic upgrade)
atiMgmtSysDownloadTftpAddress
[Text] DOWN IP
Address of TFTP server
atiMgmtSysDownloadFile1
[Text] DOWN NAME 1
Firmware lename, e.g. “esm1100_.phy”
atiMgmtSysDownloadCtrl
[Discretes] GET NEW IMAGE
1 (initiate download of one rmware le)
atiMgmtSysDownloadSysDescr
NA
Provided with rmware release notes,
e.g. ”ATIP01V1.12.0_”
atiMgmtSysDownloadSysObjectID
NA
OID embedded in transponder to
ensure rmware compatibility, provided
with release notes