Manual
18 746-257-B2-001, Rev. B (01/2014)
The IDH4 Series will inherit the cable modem community string settings provided by the DOCSIS
Conguration File.
NOTE:
Table 3-4, Transponder Communications Parameters
NOTE:
Before setting options, verify UDP ports 37, 69, 161, 162 and TCP port 80 are not blocked.
SNMP Parameter Type Description Value
atiMgmtSnmpTrapOnNormal
OID: 1.3.6.1.4.1.926.1.3.1.5.1.0
Integer Send SNMP trap when alarmed
condition returns to normal state
1 = Disabled
2 = Enabled (Default)
atiMgmtSysDownloadReCfgTime
OID: 1.3.6.1.4.1.926.1.3.2.1.13.0
Integer Download interval for IDH4 Series-
specic items in modem cong le
(hours)
24 (Default)
atiMgmtSysSnmpTimeout
OID: 1.3.6.1.4.1.926.1.3.1.5.3.0
Integer Time IDH4 Series will wait before reset
if SNMP trafc is not detected (minutes)
1440 (Default)
Note: if set to zero, watchdog will be disabled.
atiMgmtSysHttpAccess
OID: 1.3.6.1.4.1.926.1.3.2.2.4.1.0
Integer
HTTP Web Server
1 = Disabled
2 = Enabled (default)
See Section 10.0 for complete parameter denitions.
3.0 Network Configuration
3.3 Setting Communication Options
Communications Settings may be changed through the Alpha MIB remotely using an SNMP MIB browser
or automatically by placing the SNMP parameters into the DOCSIS cong le.
See Section 6, Data Management for an explanation of the Alpha MIB.