Instruction Manual

Doc. #: 0260011-J0 Rev B
56
6.1.6 View Live Status inverter report
The menu category Vi ew Live Status generates a report of all acquired inverters in the system.
Selecting a row sends a locate command. The LEDs of the selected inverter will blink momentarily.
Figure 37 — Inverters > View Live Status interface
A pull down menu allows re-assignment of the inverter module number in the report: to correspond with its
physical location on the shelf, for example.
Selecting a module number that is already used will swap the numbering of the two modules.
6.2 Inverter monitoring and control
The Inverter menu category consists of inverter alarms, signals and settings. Parameters can be
accessed such as the number of acquired inverters, output voltage/power, and source position.
Other features include: input source, inventory update,inverter locate, group assignment, inverter
firmware upgrade, major and minor alarms.