Instruction Manual

016-559-B0-001 Rev. A

Fig. 2-4, RF Module Removal

2.0 Installation, continued

2.4 RF Module Removal

Tools Required:

• No. 2 Flat head screwdriver

Procedure:

1. Disconnect the two Molex connectors (Output, J4, Input, J5).

2. Loosen the two captive screws near the center of the module.

3. Grasp the pull rings with your index ﬁ ngers and pull ﬁ rmly away from the enclosure.

Pull Ring

Captive Screws

Disconnect per step 1

Fig. 2-5, RF Module Removed