User Manual

NOTES: 1. The UPS will be internally congured for either 208V or 240V output.

Check the nameplate rating of the UPS to verify the correct voltage.

2. Omit this connection if 120V output is not required or available.

3. Terminal designations are shown for Standard VBPT Series.

If BPT -S Series transformer is used, refer to label on transformer for actual terminal

designations.

Figure 6.10

System Bypass Schematic

240V IN - 120V/208V OUT

NOTE 3

NOTE 2

NOTE 1

The Alpha BPS Series

Doc# 020-133-B0 Rev. 01 / 07