Operator`s manual

45 4 Communication

4.5 User Parameters

Main menu #5, user parameters, lets you set up the automatic self test, remotely shut down the

unit, change the password and set up RS–232 communications with or without an external

modem.

To access most of these functions, you need to enter a password. The factory set pass-

word is 1111. If you change it (Items #58 and #59), make sure you keep a copy of it in a

safe and easily accessible place or you will not be able to access the unit.

4.5.1 Menu Overview

The readouts:

• CFR software ver. XX.XX

• Micro SerNo XXXXXXX

• EEProm Ver. XXXXXXXXXX

• Power Board SerNo XXXXXXX

tell you what version of software, hardware and microprocessor are installed in your unit.

Figure 4.15

User Parameters Menu

sretemaraPresUsretemaraPresU

sretemaraPresU

sretemaraPresUsretemaraPresU

0505

tuptuO

nwodtuhS

puteS

nidenialpxesiesus'unemsihT.tuptuoehtputratsdnanwodtuhsotuoyswollasihT

".sretemaraPnwodtuhStuptuOteS:05#uneMbuS",2.5.4noitceS

2525

lanretxE

puteSmedoM

nidenialpxesiesus'unemsihT.tinuehtotmedomlanretxenatcennocotuoyswollasihT

".medoMlanretxEehtgnisUdnagnillatsnI",7.4noitceS

3535

tratStseTteS

.tsetflesatratsotnehwtinuehtlletotkcolcnwodtnuocastratssihT

ehT.setunim4dnasruoh5,syad6nitsetflesatratsottinuehtsllet"40:50:60"gniretnE

nehwstratskcolcretnE.dehsupsi

ebtonebyamemittratstsetlautcaehtos,kcolcemitlaeraevahtonseodtinuehT:PIT

.tatratsottidetaluclacuoyemitehtyltcaxe

5555

tseTteS

ycneuqerF

rebmunehtsidderehwsyadddyrevesisabralugeranotsetflesaodottinuehtslletsihT

.stsetneewtebsyadfo

nisyad0gniretneybenodsisihT.delbasidsierutaefsiht"FFO"swohsneercsehtnehW

.03sideretneebnactahtsyadforebmunmumixamehT.ycneuqerftseteht