Manual

031-314-B0-001, Rev. A (12/2012)

2.0 Installation, continued

2.10

Battery Installation, continued

Battery Wiring Procedure:

Fig. 2-18, Inline Fuse Stack Up

Lock Washer

Flat Washer

Ring Terminal

Fuse

Flat Washer

Nut

Bolt (torque to 75in-lbs

on fused terminal)

1. Place batteries in the enclosure with manufacturer’s

specied spacing between each battery.

2. Remove and save Battery Terminal Covers.

3. Connect adjacent batteries with Intercell Bar, see

Fig. 2-17. Where applicable install the Remote

Temperature Sensor.

For further information for battery connections and wiring, see Alpha p/n 031-314-08 Wire

Diagram FBE2322 System.

NOTE:

Fig. 2-19, Example of Completed

Battery Installation

Fig. 2-17, Example of Battery

Stack Up

4. Where applicable, install the Inline Fuse, (see

Fig. 2-18).

5. Replace Battery Terminal Covers.

6. Make nal connections to equipment per

manufacturer’s recommendations.

7. Battery installation is now complete (see Fig. 2-19

for example).

Nut (torque to

manufacturer's

specifications)

Lock Washer

Flat Washer

Remote Temp. Sensor

Intercell bar