Owner's manual

Argus Technologies Ltd. 010-592-C0 Rev G WC
Printed in Canada. © 2008 Argus Technologies Ltd. ARGUS is a registered trademark of Argus Technologies Ltd. All Rights Reserved. Page 13 of 23
5. Slide the battery blocks onto the battery trays starting at the bottom (four per tray).
NOTE: When only one string of batteries is installed, thermal performance will be better on the bottom tray.
6. Secure the battery bracket thumbscrews. See Figure 11.
7. Connect the battery pigtails to the battery bracket connectors.
8. Check all battery connections and verify the yellow Battery LED is on steady.
Battery bracke
t
thumbscrews (4 PL)
Battery string A
Battery string B
Pigtail connections (8 PL)
Figure 11–Installing the batteries
NOTE: See system startup procedure before connecting batteries online.
After assembly, batteries should be numbered and “as received” readings should be taken, such as, battery
voltage and temperature. Refer to manufacturer's literature for guidelines.
See following table for typical maintenance report.