Instruction Manual

FXM Communication Manual

3 Novus User Software (Continued)

To control the unit or change it’s settings

or parameters, either click on the On/Off

buttons, or choose an item from a drop

down menu. Then click on the UPDATE

SETTING button. If you do not click on this

button, the change will not happen.

UPS SPECIFICATION

This read-only screen shows the UPS’s factory-set

specications.

UPS MONITORING

These read-only screens show the UPS’s current input

and output values and other measurements.

Input & Output: This shows you the current line input and

UPS output values and the UPS’s present operating mode.

Battery & Inverter: This shows you the battery string’s status

as well as how many times and for how long the inverter has

been active.

Relay & Load Shed: This shows you how the front panel

dry contacts are congured. If any relays are used for load

shedding, it shows the time they are set to.

Last Event: This shows you the last event the UPS went

through. It shows what fault or alarm triggered the event.