Specifications
017-230-B0 Rev 0810
58
The default command can be issued via the RS-232 HyperTerminal or the RS-232 GUI as follows:
• RS-232 HyperTerminal – type default:all and press Enter. Enter the password and the Alpha FXM returns
*default as confirmation.
• RS-232 GUI – From the UPS Maintenance > Unit Configuration screen, click the Restore Defaults button.
Enter the password to execute the command.
Restoring All Parame ters to Default Values
The purpose of this command is to reset the Alpha FXM to the factory default state. See Table P for a list of pa-
rameters that will be restored to their default values.
CAUTION!
This command resets all parameters that are user-congurable. All previously pro-
grammed operation will be lost. Implement a backup plan for mission critical opera-
tions. This command is password protected.
Figure 42 — Restore all default commands