User manual

10
2.5 Connect the Keyboard
Keyboard work as separate code lock, he has connection power supply
12V, input for departure button and one relay with change-over contact. In case
connection by special cable keyboard with SlimDoorPhone characteristics
those code lock expand and keyboard can be use not only to control relay in
keyboard, but relay in doorphone SlimDoorPhone contol too and use so 10
codes for one and 10 codes for second relay. Further it is possible keyboard
use to dialling numbers. Exit button can control one or the other relay and
relay in keyboard it is possible control from phone during conversation too
(parameter.30). Code lock for relay in SlimDoorPhone from buttons stays
conserved.
Connection by special cable is make that way will you use programming
connectors 8pin. To programming from PC is usings same USB cable USB-
KAB and program SlimDPset is in new version 2010 equipped also by program
for setting keyboard.
To basic function is necessary have connected to SlimDoorPhone
telephone line and to keyboard 12V. 12V for heating board and power supply
of relay in SlimDoorPhone can use from same source and it is possible use
also for power supply of locks. Recommended is use low power locks.
The choice is entered by gradual pressing of buttons with digits. Firstly the
key symbol must be pressed to enter a password. When pressing X, the guard
will hang up.
ATTENTION: at connection keyboard with doorphone isn't need
apply to exchanges Siemens BestBox!!!