User manual

23
Parametr
Value
Description
Default
6
z
Acoustic signalling
3 and 9
In default the unit produces acoustic signals. It can occasionally cause a problem
of incorrect detection of tones by PBX. By changing parametez“ you can switch
off this acoustic signalization. The values are:
z=0  all signalling is switched off
z=1  pick up and hang up tones are active only
z=2  other tones active only (except pick up and hang up)
z=3  all tones are active – (default)
It is possible to generate an audible signal (only in mode m=1) to alert visitors
that the door is unlocked so that they can enter. This is especially useful when
using a DC power source, as lock release may be silent.
z=8  signalling is active
z=9  signalling is unactive
Parameter
Value
Description
Default
6*
t
Delay of line connection (Siemens PBX)
1
Setes a delay for line pick-up (OFF HOOK) for new PBX types (particularly
Siemens):
t=1  standard operation
t=0  delayed start
5.8 Overview of Parameters
Parameter
Value
Description
Default
1
t nn…
No. nn under button t
-
2
t nn…
No. nn under button t
-
31
r
Relay mode
1
32
hhhhhh
External access code in DAY + NIGHT
mode
-
33
hhhhhh
External access code in DAY mode
-
34
hhhhhh
External access code in NIGHT mode
-
35
aa
Internal access code
55
36
ss
Relay closing time
05