User manual

2.1.2 Uncover control elements

4. Push the aluminium speaker grille down (see

figure  4).

2.1.3 Wiring and wall mounting

5. Use the wall mounting

template at the end of the

manual to mark the

position for the screw

holes and cable

connection on the

mounting surface. Drill the

holes.

6. Feed the cable (analogue

line, power supply, lock 

see figure - 6) through the

cable hole.

Fix the panel to the wall

using the screws and

rawlplugs supplied.

Note: Some materials such as metal and wood may require special

screw types.

To power the unit for voice, connect the telephone wires into the terminal

(on the right side). Using either a standard analogue phone line or an

analogue extension on a PBX.

For the external power supply, connect to the terminal "12V" external

power supply AC min. 10V / max. 15V or DC min. 12V / max. 18V.

The energy consumption of a connected electrical (magnetic) lock (0,5A 

1,0A) determines the load on the power supply. If you activate the heating

feature the PCB current will climb to about 150mA. We recommend

power supply AC 12V/1A.