Operator`s manual

A1 Connecting the RS-232 Port

The surveillance version of the Novus Micro Secure has a DB-9 female connector. When

connected to a PC with Window’s HyperTerminal or other terminal emulation software, it can

be remotely monitored and controlled with it’s command-line system (See Sections A2 to A5).

The Novus User Software provides a Windows or Web browser type of control (See Section

A6).

Procedure

1. Connect a 9-pin, fully shielded, straight-

through DB-9 to DB-9 connector cable

between the computer’s port and the

UPS’s port.

2. Congure the communications

parameters to the values shown in the

terminal set up table.

RS-232 Wiring Finished

Terminal Set Up Table

Emulation

Type

VT 100 or

Compatible

Backspace N/A

Duplex Mode Half Duplex Break Length N/A

Xon/Xoff

Flow Control

None Emulation

Type

N/A

RTS/CTS

Flow Control

Off

Communication

Parameters

Line Wrap On Handshaking Software

Handshaking

Screen Scroll On Baud Rate 2400 bps

Translation

CR Data Format 8 Data, No

Parity, 1 Stop

Bit

Appendix

Doc# 017-220-B0 Rev. 01 / 07 13