Operator`s manual

A2.3 Line Status
Line status tells you the line’s condition (See also Figure A2.1). For an updated value, press
ENTER.
A2.4 Output Status
Output status tells you how the UPS is producing power (See also Figure A2.1). For an
updated value, press ENTER.
Line Status
Normal The line is within specications. The UPS is
operating in Line mode.
Boost Line voltage is out of tolerance. The UPS is
operating in Boost mode.
Boost 2 Line voltage is out of tolerance. The UPS is
operating in Boost 2 mode.
Buck Line voltage is out of tolerance. The UPS is
operating in Buck mode.
Buck 2 Line voltage is out of tolerance. The UPS is
operating in Buck 2 mode.
Blackout The line is absent.
Freq Low Line frequency is too low.
Freq High Line frequency is too high.
Line Status: Normal
Output Status: Line Mode
Faults: No Faults
Alarms: No Alarms
Output Status
Line Mode
Battery Mode
Battery mode, low bat. warning
Battery mode (testing battery)
Boost mode
Boost 2 mode
Buck mode
Buck 2 mode
Hot swap mode
Inverter off due to fault
Inverter off due to low battery
Inverter off at start-up
Shutdown due to user request
Line Status: Normal
Output Status: Line Mode
Faults: No Faults
Alarms: No Alarms
Novus Micro Secure 100 Operator’s Manual
Doc# 017-220-B0 Rev. 01 / 07 16