Operator`s manual

ALARMS & FAULTS
This read-only screen shows you what malfunctions
the UPS has. When the fault or alarm indicators on the
horizontal bar are lit, place your mouse over the light to
learn what it is, or click on the light to go straight to this
screen.
EVENT HISTORY
This screen shows you the last 100 events the UPS
went through. Choosing a number in the Event Index
list box and then clicking on the Show Event button
will show you the event, when it happened and what
fault or alarm caused it.
Clicking on the Clear History button clears the log.
This action cannot be undone.
COMMUNICATIONS
This screen changes the UPS’s communication
parameters. You cannot change the RS-232 Baud
Rate.
Novus Micro Secure 100 Operator’s Manual
Doc# 017-220-B0 Rev. 01 / 07 26