Operator`s manual

1
Battery Circuit Breaker
This circuit breaker provides overcurrent protection and is an on/off switch for battery
power. It must be on for proper UPS operation.
2
Battery Connector
This connects the batteries to the UPS.
3
Internal Fan
This microprocessor-controlled fan regulates the UPS’s internal temperature for optimum
performance. It must not be blocked. If the fan fails, an Alarm is generated (See Section
3.6, “Troubleshooting”).
4
Ethernet
This optional, RJ-45 connector is the UPS’s Ethernet connector.
Figure 1.3.4a – E-Module Control Panel
Description
(for Model 1000)
Figure 1.3.4b – E-Module Control Panel
Description
(for Model 300 or 600)
5
6
7
8 9
10
11
12
8
7
14
12
1
2
3
4
Figure 1.3.3 – E-Module Control Panel Description
13
6
Novus Micro Operator’s Manual
Doc# 017-221-B0 Rev 0307