Operator`s manual

2.2.1 Steel or Concrete Pole Mounting
Tools and Materials Required:
13 mm nut driver for the bolts that attach the cabinet to the mounting bracket.
Two pole mount straps that t the pole. Straps must be stainless or galvanized.
C001 Band-It tool or equivalent.
C206 3/4 inch stainless steel Band-It band or equivalent.
C256 3/4 inch stainless steel Band-It buckles or equivalent.
•
•
•
•
•
2. Secure the UPS cabinet to the mounting
bracket as shown with the supplied bolts.
Procedure
1. Secure the mounting bracket to the pole with
the straps as shown.
Mounting Finished
Steel or Concrete
Pole
b. Secure the cabinet to the mounting bracket.
a. Hook the top of the mounting bracket
under the case’s attachment tting.
13
Installation
Doc# 017-221-B0 Rev 0307