Operator`s manual

2.2.2 Wood Pole Mounting
Tools and Materials Required:
13 mm nut driver for the bolts that attach the cabinet to the mounting bracket.
Two 5/8 inch diameter machine bolts (UNC tread); SAE (Grade 5 or better), length to suit
the pole (not provided).
Two 5/8 inch diameter zinc-plated at washers.
Two 5/8 inch diameter hex nuts (UNC thread).
Auger or drill for boring 3/4 inch diameter holes in the wood pole.
•
•
•
•
•
Procedure
1. Using the mounting bracket as a
template, drill 2 holes into the pole to
accept the machine bolts.
2. Secure the mounting bracket to the
pole with the machine bolts as shown.
3. Secure the UPS cabinet to the
mounting bracket as shown with the
supplied bolts.
Mounting Finished
Front Side Wood
Pole
a. Hook the top of the mounting bracket
under the case’s attachment tting.
b. Secure the cabinet to the mounting bracket.
14
Novus Micro Operator’s Manual
Doc# 017-221-B0 Rev 0307