Operator`s manual

3.4 Operating the UPS
For Model 1000, the control menu (Figure 3.4.1) lets you operate the UPS or program it to suit
your operating conditions. You can also use the Novus FXM Monitor software to make these
adjustments (See Section 4.6, “Novus FXM Graphical User Interface”). For Models 300 and
600, see Section 4.
Procedure
1. From the logo screen (See Figure 3.2.1)
go to CONTROL MENUS (See Figure
3.2.3).
2. Press the SELECT button to enter the
submenu (See Figure 3.4.1).
3. Press the SCROLL button to move
between items in the submenu.
4. When you have reached the item you
want to change, press the SELECT
button. The item chosen is blinking.
5. To toggle between the choices, press the
SCROLL button. Stop when you reach
the choice you want.
6. To make the change, press the SELECT
button. The blinking stops.
Programming Finished
CONTROL
MENUS
120/60/N
LINE
CANCEL
SCROLL
SELECT
INVERTER
OFF
120/60/N
LINE
INVERTER
ON
120/60/N
LINE
Novus Micro Operator’s Manual
Doc# 017-221-B0 Rev 03/07 26