Operator`s manual

Save This Manual: It contains important installation and operating instructions. Keep it in a safe place.
Table of Contents
The emergency shutdown procedure is on the inside rear cover
DANGER
Risk of Electrical Shock
To reduce the risk of electrical shock and to ensure the safe operation of the Novus Micro, the sym-
bols below are used throughout this manual. Where they appear, only qualied personnel should
carry out these instructions.
A dangerous voltage exists in this area. Use extreme caution at all times.
Attention: Important operating instructions. Follow them exactly.
1 Introduction ................................................. 1
1.1 Safety Checklist .................................... 2
1.1.1 UPS Safety Checklist ..................... 2
1.1.2 Battery Safety Checklist ................. 3
1.2 Unpacking and Inspection Checklist ..... 4
1.3 The Novus Micro Family ....................... 5
2 Installation................................................. 10
2.1 Site Preparation Checklist ................... 11
2.2 Mounting the UPS ............................... 12
2.2.1 Steel or Concrete Pole Mounting . 13
2.2.2 Wood Pole Mounting ................... 14
2.2.3 Wall Mounting .............................. 15
2.3 Wiring the UPS ................................... 16
2.4 ATS/GTS Option ................................. 19
3 Operation................................................... 20
3.1 Turning the UPS On and Off ............... 21
3.1.1 Turn On ........................................ 21
3.1.2 Turn Off ........................................ 22
3.2 Operating the Control Panel ............... 23
3.3 Replacing the Batteries ....................... 25
3.4 Operating the UPS .............................. 26
3.6 Troubleshooting .................................. 29
3.7 Viewing the 25-Event Log ................... 31
4 Communication ........................................ 32
4.1 Wiring the RS-232 Port ....................... 33
4.2 Using the Main Menu .......................... 34
4.2.1 Main Menu Screen ....................... 34
4.2.2 RS-232 Menu Tree ....................... 35
4.2.3 Line Status ................................... 36
4.2.4 Output Status ............................... 36
4.2.5 Fault and Alarm Displays ............. 37
4.3 Adjusting and Controlling the UPS ...... 38
4.4 Programming the Dry Contacts and the
Clock ......................................................... 39
4.5 Accessing the 100-Event Log ............. 41
4.6 Novus Micro Graphical User Interface 42
4.6.1 Introduction .................................. 42
4.6.2 Checking Your Computer ............. 42
4.6.3 Installation and Set Up ................. 43
4.6.4 Operation ..................................... 44
5 Maintenance .............................................. 46
5.1 Updating the Software ........................ 47
Specications .............................................. 49
Warranty ....................................................... 51
Index ............................................................. 52