Operator`s manual
4.6 Novus Micro Graphical User Interface
4.6.1 Introduction
The Novus Micro RS–232 Graphical User Interface (GUI) works like a Web or Windows
©
based GUI. The screen and it’s features are shown below in Figure 4.6.1. With it you can
monitor, control and set various parameters like the date and time, when the weekly self test
is run, change the relay congurations, etc. Descriptions of all the items are given in Section
4.6.4, “Operation.”
4.6.2 Checking Your Computer for the .NET Framework
1. Click on the Start button.
2. Go to Settings. Click on it.
3. Click on Control Panel.
4. Double-click on the Add or Remove Programs icon.
When that window appears, scroll through the list of applications. If you see Microsoft .NET
Framework listed (See Figure 4.6.2), the Framework is already installed and you can go ahead
and install the Novus Monitor Software. If you don’t see it listed, you MUST install it from the
Microsoft Windows update web site before installing the Novus Monitor software.
If you are downloading from Microsoft’s web site, you must have Internet Explorer installed
on your computer. In addition to installing .NET, downloading from the web site updates your
computer with all the latest security updates. If your computer is part of a company network,
Figure 4.6.1
Novus User Software (UPS Specication Screen Shown)
Menus
Screen
Selection
Menus
Online
Indicator
Fault and
Alarm
Indicators
Readout
Screens
Novus Micro Operator’s Manual
Doc# 017-221-B0 Rev 03 /07 42