Manual

1. Installation

018-041-C0-003 Rev. C

1.3 Battery Monitor Connections

Connector Pin # String Reference Wire Label CheetahNet Display (48V)

A/B 1 1A - (0Vdc) A/B[C/D] NEG

2 1A + (+12Vdc) Vbatt 1A [C] 12V Battery #4 Vdc

3 2A + (+24Vdc) Vbatt 2A [C] 24V Battery #3 Vdc

4 3A + (+36Vdc) Vbatt 3A [C] 36V Battery #2 Vdc

5 1B + (+12Vdc) Vbatt 1B [D] 12V Battery #8 Vdc

6 2B + (+24Vdc) Vbatt 2B [D] 24V Battery #7 Vdc

7 3B + (+36Vdc) Vbatt 3B [D] 36V Battery #6 Vdc

4A + (+48Vdc) Battery #1 Vdc

8 4B + (+48Vdc) Vbatt A/B [C/D] 48V Battery #5 Vdc

C/D 1 1C - (0Vdc) A/B[C/D] NEG

2 1C + (+12Vdc) Vbatt 1A [C] 12V Battery #11 Vdc

3 2C + (+24Vdc) Vbatt 2A [C] 24V Battery #10 Vdc

4 3C + (+36Vdc) Vbatt 3A [C] 36V Battery #9 Vdc

8 4C + (+48Vdc) Vbatt A/B [C/D] 48V Battery #12 Vdc

NOTE: Only TWO 48V strings can be monitored when using a generator.

DO NOT connect to the BATT C/D connector if using the generator option.

Figure 1-3 Battery Monitor Connections for three 48Vdc battery packs

A/B

C/D

Refer to section 4 for wire kit part numbers.

WARNING: Verify that the 10 Position jumper on the transponder is set to

the proper battery voltage prior to connecting the battery monitor

wire kit.

NOTE: A maximum of 12 batteries can be monitored by the transponder.

12V

24V

36V

48V

Battery String A

Battery String B

12V

24V

36V

48V

Battery String C

12V

24V

36V

48V

Battery Monitored

Via Pin 8

To Power Supply