Manual

Safety
5
018-041-C0-003 Rev. C
Safety Notes
This symbol identifies conditions and actions that pose a hazard to the user.
This symbol cautions the user of conditions and actions that may damage the
powersupply or associated equipment.
This symbol identifies a condition that may be corrosive to equipment and parts,
or damaging to skin.
This symbol identifies a condition in which it is required to recycle discarded
materials.
This symbol identifies a situation in which static-sensitive components are present.
Warnings
WARNING: This power supply and its associated hardware (enclosure, batteries,
cabling) may contain equipment, batteries or parts which have accessible
hazardous voltage or currents.
To avoid injury :
• This power supply and its associated hardware must be serviced by authorized
personnel only.
• The enclosure which contains the power supply and associated equipment must remain
locked at all times, except when authorized service personnel are present.
• Remove watch and/or jewelry prior to servicing equipment, parts, connectors, wiring, or
batteries.
• Read and follow all installation, equipment grounding, usage, and service instructions
included in this manual.
• Use proper lifting techniques whenever handling equipment, parts, or batteries.
• Batteries contain dangerous voltages, currents and corrosive material. Battery
installation, maintenance, service and replacement must be performed by authorized
personnel only.
• Never use uninsulated tools or other conductive materials when installing, maintaining,
servicing or replacing batteries.
• Use special caution when connecting or adjusting battery cabling. An improperly
connected battery cable or an unconnected battery cable can result in arcing, a fire, or
possible explosion.
• A battery that shows signs of cracking, leaking or swelling must be replaced immediately
by authorized personnel using a battery of identical type and rating.