Datasheet

Alpha Wire | 711 Lidgerwood Avenue, Elizabeth, NJ 07207

Tel: 1-800-52 ALPHA (25742), Web: www.alphawire.com

Customer Specification

PART NO. FIT-105-3/4

Construction

1) Tubing Type Heat Shrinkable Tubing

2) Tubing Material Irradiated PVC

3) Minimum Supplied ID(In) 0.750

4) Maximum Recovered ID (In) 0.375

5) Nominal Recovered Wall Thickness(In) 0.035

6) Color(s) BLACK

Applicable Specifications

1) UL VW-1

Standard 224

2) CSA International Standard 198 105°C

3) Other

AMS-DTL-23053/2 Class1 Exc Longitudinal

Shrinkage

Environmental

1) EU Directive 2011/65/EU(RoHS2):

All materials used in the manufacture of this part are in compliance with European Directive

2011/65/EU regarding the restriction of use of certain hazardous substances in electrical and

electronic equipment. Consult Alpha Wire's web site for RoHS C of C.

2) REACH Regulation (EC 1907/2006):

This product does not contain Substances of Very High Concern (SVHC) listed on the European

Union's REACH candidate list in excess of 0.1% mass of the item. For up-to-date information,

please see Alpha's REACH SVHC Declaration.

3) California Proposition 65:

The outer surface materials used in the manufacture of this part meet the requirements of

California Proposition 65.

Properties

PAGE 1
Alpha Wire | 711 Lidgerwood Avenue, Elizabeth, NJ 07207 Tel: 1-800-52 ALPHA (25742), Web: www.alphawire.com Customer Specification PART NO. FIT-105-3/4 Construction 1) Tubing Type Heat Shrinkable Tubing 2) Tubing Material Irradiated PVC 3) Minimum Supplied ID(In) 0.750 4) Maximum Recovered ID (In) 0.375 5) Nominal Recovered Wall Thickness(In) 0.
PAGE 2
Physical & Mechanical Properties 1) Temperature Range -20 to 105°C 2) Shrink Ratio Approximately 2:1 3) Full Recovery Temperature 105 °C 4) Minimum Shrink Temperature 100°C 5) Tensile Strength 3000psi, Min ASTM D638 6) Elongation 300%, Min ASTM D638 7) Cold Impact(-55°C) no cracking ASTM D746 8) Heat Shock(180°C,4hrs) no cracking AMS-DTL-23053 9) Secant Modulus 2.5x10 4 psi, Min ASTM D882 10) Longitudinal Change +1%/-25% AMS-DTL-23053 11) Specific Gravity 1.
PAGE 3
EU/China ROHS CERTIFICATE OF COMPLIANCE To Whom It May Concern: Alpha Wire Part Number: FIT-105-3/4 FIT-105-3/4 , RoHS-Compliant Commencing With 7/1/2006 Production Note: all colors and put-ups This document certifies that the Alpha part number cited above is manufactured in accordance with Directive 2011/65/EU of the European Parliament, better known as the RoHS Directive (commonly known as RoHS 2), with regards to restrictions of the use of certain hazardous substances used in the manufacture of electrica