Installation Manual

10
Pro700 Installation and Programming Manual
BC735
Multipurpose substation
z Multipurpose substation without loudspeaker or microphone
z Surface mount, splash-proof housing designed for humid, dirty and
outdoor conditions
z Shock resistant casing in durable Bayblend plastic
z The front can be removed to allow easy access during installation
and service
z Internal 3 Watt amplifier
z Speaker volume is adjustable with switches inside the station
z Two external speakers must be added, one used as microphone
- alternatively, a separate dynamic microphone may be connected
z The 10 Watt power amplifier FC740 can be used with this station
- the loudspeaker in FC740 can be used both as loudspeaker and
microphone, (talk-back function)
z A built-in relay can be used for Remote Output or Door Opener
function or to drive external call indicators
z Handset GD745 can be connected to the unit
2.4 Optional Equipment and Interface Units
GD745
Handset module
z The GD745 Handset Module can be connected to the following
Pro700 stations:
- AA703, AA704, AA705, BC735
z Equipped with a cradle switch and a press-to-talk button for
simplex function.
GH750
Multipurpose Relay Unit
z Equipped with 8 programmable relays.
z CCTV control.
- When a door station activates the "doorbell" function, one or
several relays can operate CCTV cameras. The relay(s) is active
until the call is cancelled.
z Auto scan function.
- 3 - 8 relays will step in sequence when activated by an external
closing contact.
The auto scan time interval can be set to 8 or 16 sec.
z Audio recording etc.
- The relays can be individually programmed to operate when a
pre-determined extension number is called.
z Line supervision.
- The relay(s) may operate when the right combination of calling
and called extension numbers occur.
z Remote control.
- Relays can operate on any specific station number.