Instruction manual

9
• Always use and store the saw blades according to the manufacturer’s instructions.
The ange bolt must be tightened before starting to work with the machine.
• The work piece must be secured if it is not heavy enough to prevent movement.
• Do not use emery wheel.
• The tool is designed for cutting on horizontal surfaces.
USAGE
This wet stone cutter can be used for cutting many different materials, e.g. tile, concrete,
stone or glass. In case of doubt please read the manufacturer’s instruction. Do not use this
product in any other way as stated for normal use.
AWS-125 WET STONE CUTTER OPERATION
MAIN CONNECTION
Connect only to single-phase AC current supply and only to the main voltage specied on
the rating plate. Connection to sockets without ground protection is possible as the appliance
features protective insulation to DIN 57/740/ VDE 0740 and CEE 20. Radio suppression
complies with the European standard EN 55014.
SWITCHING ON AND OFF
Intermittent use
Switching on: Press switch trigger
Switching off: Release switch trigger
Continuous use:
Switching on: Press the on/off switch and then the locking button; release on-off switch.
Switching off: Press the on/off switch and then release.
Locking Button
Switch Trigger
Figure-3