Manual

The EPS155, EPS337, EPS339, VSS110, VDS150 Signaling Stations and
The EPS156 Code Call Station
Refer to Figure 3 for locations, names, and functions of controls and indicators.
Call a Nurse:
Pull the call cord, slide the call/cancel switch down, or press the call/cancel button. The CALL PLACED lamp will
fl ash. Wait for the nurse.
Cancel a Call:
Push the call/cancel switch up, press the call/cancel button, or twist the push button. The CALL PLACED lamp will
go off .
Improper Operation:
If the call station does not operate as described, contact qualifi ed service personnel. There are no user serviceable
parts on the EPS155, EPS337, EPS339 Emergency Stations, EPS156 Code Stations, VSS110 Visual Staff Stations, or
the VDS150 Visual Duty Stations.
5 • AlphaLinQ™ Visual Nurse Call System
1
4
5
EPS155
EPS337
Emergency
Stations
EPS156
Code Call
Station
EPS339
Emergency
Station
VSS110 Staff
Call Station
1. Call Placed Lamp: Indicates a call is placed when lighted.
2. Cancel Button: Cancels the call when pressed.
3. Call Button: Places a call when pressed.
4. Call/Cancel Switch: Places a call when pulled down. Cancels the call
when pushed up.
5. Call/Cancel Button: Places a call when pressed to in position. Cancels
the call when pressed or twisted to out position.
6. Tone Off Switch: Silences routine audible tone signal when in the down
position.
VDS150
Duty Station
Figure 3 Emergency, Code Call & Duty Station Control Locations
1
5
1
4
1
, 3
2
1
6