Data Sheet

Product Specification Sheet APS875 - Rev. 11/2016
EK119220 / EK119B220 Emergency-Call KitsEK119220 / EK119B220 Emergency-Call Kits
42 Central Drive • Farmingdale • NY • 11735-1202 • Phone: [phone] • Fax: [phone] Central Drive • Farmingdale • NY • 11735-1202 • Phone: [phone] • Fax: [phone]
TOLL-FREE: [phone] • Web: AlphaCommunications.com • Email: [e-mail]-FREE: [phone] • Web: AlphaCommunications.com • Email: [e-mail]
Copyright© 1998-2017 Alpha Communications® - All Rights Reserved.
Due to continuous product improvement, all colors, sizes, materials, finishes and specifications are subject to change without notice.
Architects' And Engineers'Architects' And Engineers'
SpecificationsSpecifications
The Emergency (Call for Assistance) kit(s) shall
be Alpha Communications® EK119220 (without
buzzer) or EK119B220 (with buzzer/horn) or
approved equal. Dome lights shall include a
translucent plastic cover mounted on a
flame retardant ABS plastic panel, and
shall mount over a conventional 1 or 2-gang
electrical back box. Dome lights shall feature Hi-
Brightness LEDs to eliminate costly bulb
replacement, and minimize downtime. Both
models shall operate on 220VAC primary power.
The Emergency Call switch shall be mounted on
a durable ABS plastic faceplate marked
"EMERGENCY". Signaling for assistance shall only
require a short pull in any direction on the 6'
nylon cord. Canceling the call shall be possible
only at the point of origin. Unit shall mount
on single-gang electric "gem" box or plaster
ring., and shall feature a RED 'call placed'
Indicator when activated.
The built-in buzzer/horn (in the EK119B220 kits)
shall sound as long as the dome light is lighted
(activated).
Contractor shall observe all local and national
electrical and building codes.
EK119220 / EK119B220 Emergency-Call KitsEK119220 / EK119B220 Emergency-Call Kits
The Alpha Communications® EK119220 and EK119B220 Emergency-Call Kits are the
ideal solution for a stand-alone 'Call for Assistance' applications where an emergency
switch is required. Typically these kits are ideal for use in health care facilities, public
rest-rooms (toilets) and handicapped areas. These new and improved kits now
feature Dome Lights with Hi-Brightness White LEDs so there is no need for costly
bulb replacements!
The model EK119220 consists of:
1- SF119/2A Emergency Pull Cord station (RED Indicator style)
1- SS104 220VAC primary, 24VAC secondary (U.L Listed) pigtail Transformer
1- CDL101LED Corridor Dome Light (LED type - without a buzzer).
The model EK119B220 consists of
1- SF119/2A Emergency Pull Cord station (RED Indicator style)
1- SS104 220VAC primary, 24VAC secondary (U.L Listed) pigtail Transformer
1- CDL123B Corridor Dome Light (LED type - without a buzzer).
FeaturesFeatures
Ideal for 'Toilet Alarm' or other Stand-Alone application
Hi-Brightness White LEDs - No Bulb Replacement!!
Safe - Low Voltage Wiring
Dome Light SpecificationsDome Light Specifications
Dimensions:
Height: 5.20" (133mm)
Width: 4.55" (116mm)
Projects: 3.50" (89mm) from mounting surface
AC Current:
EK119220: 24VAC, 10mA
EK119B220: 24VAC, 170mA
Mounting:
Fits standard 1 or 2-gang box. Minimum depth of box to be no less
than 1.75".
Finish:
Translucent white plastic cover mounted on a flame retardant, fog
white ABS plastic panel.
Pull Cord SpecificationsPull Cord Specifications
Dimensions:
Height: 4.50" (114mm) (less cord)
Width: 2.75" (70mm)
Depth: 1.50" (38mm) (into wall)
Faceplate: White ABS (flame retardant) plastic.
Connection: Pigtail wire leads (2 separate sets of 2 leads)
Mounting: Standard single-gang electrical box
Marking: "EMERGENCY" in Black Letters
Call Placed Notification: Sliding Red Window Type