Data Sheet

Product Specification Sheet APS876 - Rev. 11/2016
EK154220 / EK154B220 Emergency-Call (Call for Assistance) Kit(s)EK154220 / EK154B220 Emergency-Call (Call for Assistance) Kit(s)
42 Central Drive • Farmingdale • NY • 11735-1202 • Phone: [phone] • Fax: [phone] Central Drive • Farmingdale • NY • 11735-1202 • Phone: [phone] • Fax: [phone]
TOLL-FREE: [phone] • Web: AlphaCommunications.com • Email: [e-mail]-FREE: [phone] • Web: AlphaCommunications.com • Email: [e-mail]
Copyright© 1998-2017 Alpha Communications® - All Rights Reserved.
Due to continuous product improvement, all colors, sizes, materials, finishes and specifications are subject to change without notice.
Architects' And Engineers'Architects' And Engineers'
SpecificationsSpecifications
The Emergency (Call for Assistance) kit(s) shall
be Alpha Communications® EK154220 (without
buzzer) or EK154B220 (with buzzer/horn) or
approved equal. Dome lights shall include a
translucent plastic cover mounted on a
flame retardant ABS plastic panel, and
shall mount over a conventional 1 or 2-gang
electrical back box. Dome lights shall feature Hi-
Brightness LEDs to eliminate costly bulb
replacement, and minimize downtime. Both
models shall operate on 220VAC primary power.
The Emergency Call PUSH switch shall be
mounted on a durable ABS plastic faceplate
marked "EMERGENCY". Signaling for assistance
shall only require a 'push' on the locking
pushbutton switch. Canceling the call shall
be possible only at the point of origin, by
pressing on the pushbutton switch again to
release its locking mechanism. Unit shall mount
on single-gang electric "gem" box or plaster
ring., and shall feature a RED 'call placed'
Indicator when activated (depressed).
The built-in buzzer/horn (in the EK154B220 kits)
shall sound as long as the dome light is lighted
(activated).
Contractor shall observe all local and national
electrical and building codes.
EK154 / EK154B Emergency-Call KitsEK154 / EK154B Emergency-Call Kits
The Alpha Communications® EK154220 and EK154B220 Emergency-Call Kits are the
ideal solution for a stand-alone 'Call for Assistance' applications where an emergency
PUSH switch is required. Typically these kits are ideal for use in health care facilities,
public rest-rooms (toilets) and handicapped areas. These new and improved kits now
feature Dome Lights with Hi-Brightness White LEDs so there is no need for costly
bulb replacements! Both models operate on 220VAC primary electrical power.
The model EK154220 consists of:
1- SF154A Emergency Pull Cord station (RED Indicator style)
1- SS104 220VAC primary, 24VAC secondary (U.L Listed) pigtail Transformer
1- CDL101LED Corridor Dome Light (without a buzzer)
The model EK154B220 consists of
1- SF154A Emergency Pull Cord station (RED Indicator style)
1- SS104 220VAC primary, 24VAC secondary (U.L Listed) pigtail Transformer
1- CDL123B Corridor Dome Light (with a built-in buzzer/horn)
FeaturesFeatures
Ideal for 'Toilet Alarm' or other Stand-Alone application
Easy Bulb Replacement - No Tools Required
Safe - Low Voltage Wiring
Dome Light SpecificationsDome Light Specifications
Dimensions:
Height: 5.20" (133mm)
Width: 4.55" (116mm)
Projects: 3.50" (89mm) from mounting surface
AC Current:
EK154220: 24VAC, 10mA
EK154B220: 24VAC, 170mA
Mounting:
Fits standard 1 or 2-gang box. Minimum depth of box to be no less
than 1.75".
Finish:
Translucent white plastic cover mounted on a flame retardant, fog
white ABS plastic panel.
Emergency Station SpecificationsEmergency Station Specifications
Dimensions:
Height: 4.50" (114mm)
Width: 2.75" (70mm)
Depth: 1.50" (38mm) (into wall)
Faceplate: White ABS (flame retardant) plastic.
Connection: Pigtail wire leads
Mounting: Standard single-gang electrical box
Marking: "EMERGENCY" in Black Letters
Call Placed Notification: Locking Pushbutton/Switch with Red Indicator