Data Sheet

Product Specification Sheet APS632 - Rev. 08/2014
KMB3 / KMBC3 Series QwikBUS™ Camera Modules (For modular door stations)
42 Central Drive • Farmingdale • NY • 11735-1202 • Phone: [phone] • Fax: [phone]
TOLL-FREE: [phone] • Web: AlphaCommunications.com • Email: [e-mail]
Copyright© 1998-2014 Alpha Communications® - All Rights Reserved.
Due to continuous product improvement, all colors, sizes, materials, finishes and specifications are subject to change without notice.
< Previous (APS631) Next (APS633) >
KMB3 / KMBC3 Camera Module
Sho wn in Tita nium Finish
Architects' And Engineers' Specifications
Camera module(s) shall be Alpha Communications® / S.T.R.™
QwikBUS™ KMB3 (Black and White) or KMBC3 (Color) series or
approved equal. Camera module(s) shall snap into the
corresponding MT series modular panel frame(s).
Camera module(s) shall be finished in Titanium (suffix-T), White
(suffix-W) or Brown (suffix-B), and shall feature a 3.6mm lens, 92
degree angle of view (side to side) and 700 lines of resolution.
Camera module shall also feature built-in Infrared Illuminators.
Recommended mounting height to center of camera lens is approx.
5 feet (1.55 meters) from finished floor.
Contractor shall observe all local and national electrical and
building codes
KMB3 / KMBC3 Series Camera Module for Modular
Series Door Stations
The KMB3 / KMBC3 series camera modules are designed to be used
with Alpha Communications® / S.T.R.™ modular series door entry
stations. The KMB3 series is a Black and White camera, and the
KMBC3 series is a Color camera Both models feature a 3.6mm lens
and 92 degree angle of view (side to side) and 700 lines of
resolution. The KMB3 features a luminous sensitivity of 0.8 Lux and
the KMBC3 features a luminous sensitivity of 2.5 Lux. Both models
also features built-in Infrared Illuminators. All versions operate on
the associated QwikBUS™ system power supply.
All KMB3 / KMBC3 camera modules are available in three (3)
finishes; Titanium (suffix-T), White (suffix-W) or Brown (suffix-B).
All KMB3 / KMBC3 camera modules are 3.94"w x 3.94"h (100mm x
100mm), and are made to snap into the MT series modular panel
trim frame(s).
Recommended mounting height to center of camera lens is approx.
5 feet (1.55 meters) from finished floor.
To service the KMB3 / KMBC3 series camera modules, once
installed, use the model 13510 key / tool unit.
Model 13510 Key / Tool