Data Sheet

Product Specification Sheet APS524 - Rev. 08/2015
MT Series Trim Frames (For modular door stations)
42 Central Drive • Farmingdale • NY • 11735-1202 • Phone: [phone] • Fax: [phone]
TOLL-FREE: [phone] • Web: AlphaCommunications.com • Email: [e-mail]
Copyright© 1998-2015 Alpha Communications® - All Rights Reserved.
Due to continuous product improvement, all colors, sizes, materials, finishes and specifications are subject to change without notice.
MT1T (Titanium-shown)
MT6/2W (White-shown)
MT Series Modular Frames for Modular Series Door
Stations
The MT modular frames are designed to be used with the Alpha
Communications® / S.T.R.™ modular series door entry stations and
system annunciators. There are seven (7) configurations available
in single and double-width varieties. The MT frames are designed
to be used in conjunction with the UPG series (flush) or APG series
(surface) housing(s). For larger configurations, multiple housings
and MT frames may be mounted alongside each other. The MT trim
frames are available in three (3) finishes; Titanium (suffix-T),
White (suffix-W) or Brown (suffix-B). All MT series frames require
the #13510 key / tool needed for installation and servicing of
panel(s).
Due to its unique construction, the MT modular frames can be
mounted vertically or horizontally, depending on the mounting
requirements.
The MT housings have built-in stand-offs to allow mounting of the
individual modular snap-in component's PC boards, for easy and
neat system wiring.
See chart below for reference of sizes/types and configurations
available.
CONFIGURATIONS AVAILABLE
Model# # of Modules Height Width Depth**
MT1* 1W x 1H 5.67" 5.12" 0.63"
MT2* 1W x 2H 9.60" 5.12" 0.63"
MT3* 1W x 3H 13.55" 5.12" 0.63"
MT4* 1W x 4H 17.50" 5.12" 0.63"
MT4/2* 2W x 2H 9.60" 9.06" 0.63"
MT6/2* 2W x 3H 13.55" 9.06" 0.63"
MT8/2* 2W x 4H 17.50" 9.06" 0.63"
*Titanium (suffix-T), White (suffix-W) or Brown (suffix- B).
**Depth indicates size from front to back of frame only, not
including the APG series housing and/or snap-in module(s)
included.
Architects' And Engineers' Specifications
Modular panel frame(s) shall be Alpha Communications® / S.T.R.™ MT series or approved equal. Trim frame(s) shall be modular type and shall
be used in conjunction with the proper UPG series (flush) or APG series (surface) housing(s).
MT frame(s) shall be made of durable cast aluminum and shall be finished in Titanium (suffix-T), White (suffix-W) or Brown (suffix- B), and
shall mount onto the corresponding UPG or APG series housing(s).
All MT series frames shall require the #13510 key / tool needed for installation and servicing of panel(s), in the future, which shall be
provided by the contractor.
Contractor shall observe all local and national electrical and building codes