Data Sheet

Product Specification Sheet APS721 - Rev. 07/2013
NC505ES Remote Receiver and 6 Relay Unit (TC500 Series)NC505ES Remote Receiver and 6 Relay Unit (TC500 Series)
42 Central Drive • Farmingdale • NY • 11735-1202 • Phone: (631) 777-5500 • Fax: (631) 777-559942 Central Drive • Farmingdale • NY • 11735-1202 • Phone: (631) 777-5500 • Fax: (631) 777-5599
TOLL-FREE: (800) 666-4800 • Web: AlphaCommunications.com • Email: info@alphacommunications.comTOLL-FREE: (800) 666-4800 • Web: AlphaCommunications.com • Email: info@alphacommunications.com
Copyrigh1998-2016 Alpha Communications® - All Rights Reserved.
Due to continuous product improvement, all colors, sizes, materials, finishes and specifications are subject to change without notice.
FeaturesFeatures
6 dry-contact Form-C outputs
Screw terminal connections
Wiring access via hidden port
Built-in tamper switch
Programs without laptop or other computer
LCD Display
LEDs display current status of transmitters
Functions independently of Tek-CARE®500
Clean appearance for interior mounting
Required ComponentsRequired Components
PK505 Power Supply (1 per NC505ES required)
NC505ES Specialty ReceiverNC505ES Specialty Receiver
The Alpha Communication/ TekTone NC505ES is designed to allow users of the
Tek-CARE®500 (TC500) Wireless Emergency Call System to connect external
dome lamps and dialers to the system. This provides for an alternate annunciation
path, in addition to the normal Tek-CARE®500 screen. The NC505ES is
not dependent upon the Tek-CARE®500's master station computer. It features 6
separate, dry-contact outputs that can be programmed for activation by up to 16
unit transmitters.
The case has built-in tamper detection outputs for connection to an external alarm
system. All dry contact outputs are individually configurable for latching, follower or
momentary activation modes. The unit is designed for indoor use only, and
cable access and connections are hidden. The face of the unit features a clean
appearance with visual indication of the status.
SpecificationsSpecifications
Dimensions:
6.50"W X 3.50"H X 1.00"D
(166mm X 89mm X 26mm)
Construction: Beige plastic outer casing
Connections: Barrier type screw terminals
Mounting: Surface mount via 2 screws (included)
Environment: 32�F�140�F, 0%�90% non-condensing relative humidity
Power: 10-14VDC @ 50mA (supplied by PK505)
Architects' And Engineers' SpecificationsArchitects' And Engineers' Specifications
The NC505ES shall provide remote annunciation of call activity within the Tek-CARE®500 (TC500) Wireless Emergency Call System. It shall
function independently of the Tek-CARE®500 master station computer. It shall provide dry contact outputs which are Form-C and capable
of driving a typical 24-volt dome lamp as used in the call systems. The NC505ES shall also allow the use of an external, model TAK-4202 or
TAK-4208 dialer, that accepts dry contact input(s). The NC505ES shall also enable SF501ES and SF502ES transmitters to trigger the
external dialer.
All programming shall be non-volatile. The unit shall provide for easy connection of field wiring. Access to the interior of the case shall be
secured by a built-in tamper switch - for easy connection to a third-party alarm system. The NC505ES shall be designed for indoor use only,
and shall feature hidden cable connections and access. The current status of all outputs shall be visually indicated on the face of the unit.
TekTone® has designed the Tek-CARE®500 (TC500) to work as a system. Its NC501ES Master Station Computer has been carefully
designed and matched to work with TC500 wireless and wired peripherals. TekTone® will not warrant or support components of TC500 that
are purchased separately unless the components are add-ons to previously sold systems. TekTone® will also not warrant or support a
system that is a mix of TekTone® and Non-TekTone® parts, unless prior written permission has been obtained. In order to track our
systems and to inform facilities of software upgrades, full site information (site name, address and phone number) will be required when
ordering. Site information and NC501ES warranty number will also be required when requesting technical support.

Summary of content (1 pages)